Study on Deformation and Pore Water Pressure Characteristics of Diesel-Contaminated Soil After Thermal Desorption

• Published in: Water (Basel) 2024-12, Vol.16 (23), p.3433
• Main Authors: Chun, Yeyang, Liu, Zonghui, Liang, Tenglong, Zhou, Dong, Su, Dongpo
• Format: Article
• Language: English
• Subjects: Deformation; Engineering; Experiments; Hydrocarbons; Pollutants; Pollution; Radioactive wastes; Simulation; Soil contamination; Su Dongpo; Sulfur content; Temperature effects; Waste disposal
• ISSN: 2073-4441; 2073-4441
• DOI: 10.3390/w16233433

The deformation characteristics of soil after thermal desorption are crucial for the evaluation of engineering properties, but the evolution mechanism is currently unclear. This study focuses on the thermal desorption of contaminated soil, conducting Geo-dynamic Systems consolidation-rebound tests to reveal the evolution mechanism of consolidation–rebound deformation and pore pressure characteristics, and exploring the evolution mechanism through pore structure, particle size distribution, and Cation Exchange Capacity tests. Results show that the consolidation characteristics of uncontaminated soil increase and then decrease with heating temperature, with 400 °C as a turning point. In contrast, the consolidation deformation of contaminated soil continues to decrease. The vertical deformation of the soil in the pre/early consolidation stage is greater before 400 °C, while after 400 °C, the deformation continues to increase with consolidation pressure, and higher heating temperatures enhance the soil’s rebound deformation ability. Pore water pressure changes in two stages, with temperature ranges of 100–300 °C and 300–600 °C, and with increasing heating temperature, the characteristics of pore pressure change from clay to sand. Mechanism tests reveal that inter-aggregate pores affect initial deformation, while intra-aggregate pores affect later deformation, both showing a positive correlation. Aggregate decomposition increases initial deformation capacity at 100–400 °C while melting body fragmentation increases later deformation capacity at 500–600 °C. CEC decreases with increasing heating temperature, reducing inter-particle resistance and increasing soil deformation capacity. Particle size distribution and Cation Exchange Capacity impact consolidation–rebound pore pressure.