The development of a linear cutting machine used to characterize FEM modelling parameters for cutting UG2 Reef

South Africa has two main platinum reef deposits, namely the Merensky reef and the UG2 reef. These reefs are currently mined using traditional drilling and blasting methods. Mechanized cutting could potentially enable continuous mining, which would offer significant advantages. This would require th...

Full description

Saved in:
Bibliographic Details
Published in:Journal of the South African Institute of Mining and Metallurgy 2024-11, Vol.124 (11), p.673
Main Authors: Preez, U Du, Psheyns, Malan, D F
Format: Article
Language:English
Subjects:
Cutting equipment
Cutting parameters
Drilling machines (tools)
Finite element method
Mathematical models
Rock properties
Sandstone
Underground mines
Variability
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:South Africa has two main platinum reef deposits, namely the Merensky reef and the UG2 reef. These reefs are currently mined using traditional drilling and blasting methods. Mechanized cutting could potentially enable continuous mining, which would offer significant advantages. This would require thorough understanding of the cutability of the rock. To explore this, a linear cutting machine was developed to conduct laboratory scale cutting tests. This work describes the development and commissioning of the cutting machine using sandstone, as well as subsequent characterization tests on UG2 reef samples. UG2 reef has large variability in strength on a millimeter scale. This introduces uncertainty m the test results due to added variance from one cut to the next for the same UG2 reef sample. Another problem is the variability in rock properties of the UG2 reef, when testing samples from different mines. The cutting tests led to fine fragmentation, which is known to be a significant problem for cleaning operations in underground stopes and warrants further research. A finite element method simulation of the rock cutting was conducted using ANSYS LS-DYNA and the continuous surface cap model to simulate rock cutting in the UG2 reef. It was found that it is possible to use LS-DYNA with the continuous surface cap model to model rock cutting of UG2 reef and get acceptable results, but the user must calibrate the model parameters using the experimental results. Therefore, the model is only fit for one set of cutting parameters and further work is required to generalize results.
ISSN:0038-223X
2411-9717
DOI:10.17159/2411-9717/3394/2024