Experimental investigation of forces and geometry of a net cage in uniform flow

• Published in: IEEE journal of oceanic engineering 2005-01, Vol.30 (1), p.79-84
• Main Authors: Lader, P.F., Enerhaug, B.
• Format: Article
• Language: English
• Subjects: Aquaculture; Current measurement; Drag; Flexible structures; Force measurement; Geometry; Hydrodynamics; hydroelasticity; Marine; marine structures; Numerical models; Reynolds number; Sea measurements; Shape; Testing
• ISSN: 0364-9059; 1558-1691
• DOI: 10.1109/JOE.2004.841390

A scale model of a flexible circular net with different weights attached to the bottom was tested in a flume tank. Global forces and net deformation were measured for different steady current velocities. Three different sizes of bottom weights were used in the tests. The results from these tests are presented and discussed with the emphasis on the dependency between the forces and the geometry. Comparison is also made to empirical based formulas for calculation of drag and lift forces on net structures. Findings show that i) the forces on, and deformation of a flexible net structure are mutually highly dependent on each other; ii) estimates of global forces on a flexible net structure calculated using simple drag formulas derived from stiff net panel experiments give large errors when compared to experimental measurements; iii) numerical models taking into account the dependency between force and deformation should be used to obtain accurate estimates of forces on flexible net structures; and iv) the forces on a flexible net structure are dependent on Reynolds number, and their dependency are similar to that of a regular cylinder.