Dual-mode antenna design for microwave heating and noninvasive thermometry of superficial tissue disease

• Published in: IEEE transactions on biomedical engineering 2000-11, Vol.47 (11), p.1500-1509
• Main Authors: Jacobsen, S., Stauffer, P.R., Neuman, D.G.
• Format: Article
• Language: English
• Subjects: Applicators; Biological and medical sciences; Biomedical Engineering; Conducting materials; Diseases; Electromagnetic heating; Equipment Design; Heating; Humans; Hyperthermia therapy; Hyperthermia, Induced - instrumentation; Medical sciences; Microstrip antennas; Microwave antennas; Microwave devices; Microwave heating; Microwave radiometry; Microwaves - therapeutic use; Neoplasms - physiopathology; Neoplasms - therapy; Noninvasive medical procedures; Printed circuit boards; Radiometry; Radiometry - instrumentation; Radiotherapy. Instrumental treatment. Physiotherapy. Reeducation. Rehabilitation, orthophony, crenotherapy. Diet therapy and various other treatments (general aspects); Skin Temperature; Slot antennas; Spirals; Technology. Biomaterials. Equipments. Material. Instrumentation; Temperature; Thermometers; Tissue
• ISSN: 0018-9294; 1558-2531
• DOI: 10.1109/10.880102

Hyperthermia therapy of superficial skin disease has proven clinically useful, but current heating equipment is somewhat clumsy and technically inadequate for many patients. The present effort describes a dual-purpose, conformal microwave applicator that is fabricated from thin, flexible, multilayer printed circuit board (PCB) material to facilitate heating of surface areas overlaying contoured anatomy. Preliminary studies document the Feasibility of combining Archimedean spiral microstrip antennas, located concentrically within the central region of square dual concentric conductor (DCC) annular slot antennas. The motivation is to achieve homogeneous tissue heating simultaneously with noninvasive thermometry by radiometric sensing of blackbody radiation from the target tissue under the applicator. Results demonstrate that the two antennas have complimentary regions of influence. The DCC ring antenna structure produces a peripherally enhanced power deposition pattern with peaks in the outer corners of the aperture and a broad minimum around 50% of maximum centrally. In contrast, the Archimedean spiral radiates (or receives) energy predominantly along the boresight axis of the spiral, thus confining the region of influence to tissue located within the central broad minimum of the DCC pattern. Analysis of the temperature-dependent radiometer signal (brightness temperature) showed linear correlation of radiometer output with test Load temperature using either the spiral or DCC structure as the receive antenna. The radiometric performance of the broadband Archimedean antenna was superior compared to the DCC, providing improved temperature resolution (0.1/spl deg/C-0.2/spl deg/C) and signal sensitivity (0.3/spl deg/C-0.8/spl deg/C//spl deg/C) at all four 500 MHz integration bandwidths tested within the frequency range from 1.2 to 3.0 GHz.