Loading…

Investigate the nonuniformity of low-energy electron beam with large cross-sections

Over the past decades, low-energy electron accelerators have been used worldwide for surface curing and sterilization. The beam nonuniformity is an important parameter of the low-energy electron beam with large cross-sections. A simple and accurate measurement system of nonuniformity for the low-ene...

Full description

Saved in:
Bibliographic Details
Published in:Science China. Technological sciences 2012-04, Vol.55 (4), p.997-1000
Main Authors: Ren, Jie, Huang, JianMing, Zhang, YuTian, Li, DeMing, Zhu, NanKang
Format: Article
Language:English
Subjects:
Citations: Items that this one cites
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Over the past decades, low-energy electron accelerators have been used worldwide for surface curing and sterilization. The beam nonuniformity is an important parameter of the low-energy electron beam with large cross-sections. A simple and accurate measurement system of nonuniformity for the low-energy electron beam with large cross-sections was developed. The main concept consists in the measurement of nonuniformity, which is realized by using a linear actuator to drive two scanning wires through the beam's cross-sections at a fixed speed. The beam distribution can be obtained by sending/collecting the current signals to/from the Data Acquisition (DAQ) software on a laptop by a USB DAQ card. This device is very convenient for the performance testing of a new accelerator at the manufacturer's site. The distribution of the homemade low voltage electron accelerator EBS-300-50 was measured and evaluated.
ISSN:1674-7321
1869-1900
DOI:10.1007/s11431-011-4716-2