Prediction and real-time monitoring techniques for corrosion characterisation in furnaces

• Published in: Materials at high temperatures 2003-01, Vol.20 (2), p.175-183
• Main Authors: Linjewile, Temi M, Valentine, James, Davis, Kevin A, Harding, N S, Cox, William M
• Format: Article
• Language: English
• Subjects: Combustion; Corrosion; Fossils; Furnaces; Indication; Real time; Tubes; Walls
• ISSN: 0960-3409; 1878-6413
• DOI: 10.3184/096034003782749035

Combustion modifications to minimise NOx emissions have led to the existence of reducing conditions in furnaces. As regulations demand lower NOx levels, it is possible (to a degree) to continue to address these requirements with increased levels of combustion air staging. However, in most practical situations, a number of adverse impacts prevent the application of deep combustion air staging. One of the more important limitations is the increased corrosion that can occur on wall tubes exposed to fuel rich combustion environments. Current boiler corrosion monitoring techniques rely on ultrasonic tube wall thickness measurements typically conducted over 12 to 24 month intervals during scheduled outages. Corrosion coupons are also sometimes used; typically require considerable exposure time to provide meaningful data. The major drawback of these methods is that corrosion information is obtained after the damage has been done. Management of boiler waterwall loss and system optimisation therefore requires a realtime indication of corrosion rate in susceptible regions of the furnace. This paper describes the results of a program of laboratory trials and field investigations and considers the use of an on-line technology in combination with innovative applications, also modelling and precision metrology to better manage waterwall loss in fossil fuelled boilers while minimising NOx emissions.