Effect of length width ratio of tapered beams on the performance of piezoelectric energy harvesters

• Published in: Smart materials and structures 2013-07, Vol.22 (7), p.075015-1-8
• Main Authors: Matova, S P, Renaud, M, Jambunathan, M, Goedbloed, M, Van Schaijk, R
• Format: Article
• Language: English
• Subjects: Cantilever beams; Computer simulation; Energy harvesting; Energy use; Exact sciences and technology; General equipment and techniques; Harvesters; Instruments, apparatus, components and techniques common to several branches of physics and astronomy; Mathematical models; Physics; Piezoelectricity; Strain; Tapering; Transducers
• ISSN: 0964-1726; 1361-665X
• DOI: 10.1088/0964-1726/22/7/075015

Tapering of the beams as a way to increase the generated output power of cantilever piezoelectric energy harvesters has gained popularity in recent years. The tapering increases the average strain in the beam and consequently the charge generated by the piezoelectric material. Different authors claim an improvement of up to 30% in the generated output power. We have investigated the possibility of using tapered beams in MEMS piezoelectric energy harvesters. Numerical simulations did not suggest any increase in the generated output power and the lack of improvement was confirmed in practice. With the help of the numerical simulations it was further found that the tapering does work but only for certain design configurations, namely for cantilevers with long slender beams. For cantilevers with short wide beams, the tapering has no significant effect on the output power of the harvester.