Construction method and optical characterization of parabolic solar modules for concentration systems

• Published in: Solar energy 2013-08, Vol.94, p.19-27
• Main Authors: Eccher, M., Turrini, S., Salemi, A., Bettonte, M., Miotello, A., Brusa, R.S.
• Format: Article
• Language: English
• Subjects: Applied sciences; Calorimetry; Direct energy conversion and energy accumulation; Efficiency; Electrical engineering. Electrical power engineering; Electrical power engineering; Energy; Exact sciences and technology; High-flux measurement; Light; Mirrors; Natural energy; Parabolic dish; Photoelectric conversion; Photovoltaic conversion; Solar cells. Photoelectrochemical cells; Solar concentration; Solar energy; Solar modules manufacturing
• ISSN: 0038-092X; 1471-1257
• DOI: 10.1016/j.solener.2013.04.028

•A process for manufacturing self-supporting parabolic solar modules was developed.•A 0.818m2 sector part of a full 5m dish with 2.5m focal was characterized.•The reflected power is concentrated in a spot of 58mm in diameter at the focus.•Power losses are estimated to be lower than 7.6% of the incident power.•By calorimetry we esteem an overall optical efficiency of 80±4%. A process to build modular solar reflectors by using plane mirrors and a sandwich structure has been developed. We applied this process to manufacture parabolic modules that can be assembled in a parabolic dish of 5m in diameter with the focus at 2.5m. This paper discusses the evaluation of the light collection performances of a single parabolic module. The reflectance of the mirror material was characterized by means of a UV–Vis spectrophotometer, in the 250–1200nm wavelength range, and of a pyrheliometer, with respect to a direct solar spectrum. The illumination profile of a module mounted on a sun-tracking system was tested by power density measurements in and out of the focal plane, and spots were compared with a theoretical one. In order to evaluate the high-flux solar energy arriving at the focus of a module, a flat-plate calorimeter was built. The study was carried out by measuring the energy absorbed by the water flow and the external losses due to convection. Based on an energy balance, the intercept factor and the overall optical efficiency of the collector were estimated.