Local heat transfer measurement and thermo-fluid characterization of a pulsating heat pipe

• Published in: International journal of thermal sciences 2014-01, Vol.75 (75), p.140-152
• Main Authors: Mameli, Mauro, Marengo, Marco, Khandekar, Sameer
• Format: Article
• Language: English
• Subjects: Applied sciences; Devices; Devices using thermal energy; Energy; Energy. Thermal use of fuels; Ethanol; Ethyl alcohol; Evaporation; Exact sciences and technology; Flow patterns; Fluid flow; Heat pipes; Heat transfer; Local heat transfer; Oscillations; Pressure variation; Pulsating Heat Pipes
• ISSN: 1290-0729; 1778-4166
• DOI: 10.1016/j.ijthermalsci.2013.07.025

A compact Closed Loop Pulsating Heat Pipe (CLPHP), filled with ethanol (65% v/v), made of four transparent glass tubes forming the adiabatic section and connected with copper U-turns in the evaporator and condenser sections respectively, is designed in order to perform comprehensive thermal-hydraulic performance investigation. Local heat transfer coefficient is estimated by measurement of tube wall and internal fluid temperatures in the evaporator section. Simultaneously, fluid pressure oscillations are recorded together with the corresponding flow patterns. The thermal performances are measured for different heat input levels and global orientation of the device with respect to gravity. One exploratory test is also done with azeotropic mixture of ethanol and water. Results show that a stable device operation is achieved (i.e. evaporator wall temperatures can reach a pseudo-steady-state) only when a circulating flow mode is established superimposed on local pulsating flow. The heat transfer performance strongly depends on the heat input level and the inclination angle, which, in turn, also affect the ensuing flow pattern. The spectral analysis of the pressure signal reveals that even during the stable performance regimes, characteristic fluid oscillation frequencies are not uniquely recognizable. Equivalent thermal conductivities of the order of 10–15 times that of pure copper are achieved. Due to small number of turns horizontal mode operation is not feasible. Preliminary results indicate that filling azeotropic mixture of ethanol and water as working fluid does not alter the thermal performance as compared to pure ethanol case. •Local heat transfer measurement and flow visualization in the Pulsating Heat Pipe.•Thermal-hydraulic characterization at different operating conditions/orientations.•Different flow patterns observed, net circulating flow being the most efficient.•Equivalent thermal conductivity PHP is of the order of 10–15 times that of copper.•Time-averaged internal heat transfer coefficient approaches 4600 W/m2 K.