Physical and mechanical properties of graphene oxide/polyethersulfone nanocomposites

• Published in: Polymers for advanced technologies 2014-03, Vol.25 (3), p.322-328
• Main Authors: Forati, T., Atai, M., Rashidi, A. M., Imani, M., Behnamghader, A.
• Format: Article
• Language: English
• Subjects: Applied sciences; Composites; Exact sciences and technology; Forms of application and semi-finished materials; Graphene; graphene oxide; Mathematical models; Mechanical properties; nanocomposite; Nanocomposites; Oxides; polyethersulfone; Polyethersulfones; Polymer industry, paints, wood; Scanning electron microscopy; Technology of polymers; Tensile strength
• ISSN: 1042-7147; 1099-1581
• DOI: 10.1002/pat.3243

The aim of this study was to investigate physical and mechanical properties of graphene oxide (GO)/polyethersulfone (PES) nanocomposite films. The films were produced by solution casting method. The mechanical properties of composite films were evaluated by tensile test. A significant enhancement in the mechanical properties of neat PES films was obtained incorporating a small amount of GO loading (0.05–1 wt.%). The highest tensile strength was observed at 1 wt.% of GO. Comparisons were made between experimental data and the Halpin–Tsai model predictions for the tensile strength and modulus of GO/PES composites. The effect of an orientation factor on model predictions was also acquired. The hydrophilicity of the nanocomposite was evaluated by assessing contact angle and enhanced wet ability of the films was obtained with increasing the amount of GO up to 1%. The morphology of the nanocomposites was investigated using scanning electron microscopy and transmission electron microscopy and the results revealed a good dispersion of GO in the PES matrix. The thermal behavior of the composite was also studied. Thermal stability of composites was increased by adding the GO. Copyright © 2013 John Wiley & Sons, Ltd.