Phosphoric acid and sodium fluoride: a novel etching combination on titanium

• Published in: Biomedical materials (Bristol) 2014-06, Vol.9 (3), p.035004-035004
• Main Authors: Jia, Fang, Zhou, Lei, Li, Shaobin, Lin, Xi, Wen, Binxue, Lai, Chunhua, Ding, Xianglong
• Format: Article
• Language: English
• Subjects: Biocompatible Materials - chemical synthesis; Biomimetic Materials - chemistry; Body Fluids - chemistry; Corrosion; Durapatite - chemical synthesis; hydrogen contents; hydroxyapatite deposition; Materials Testing; Metallurgy - methods; phosphoric acid; Phosphoric Acids - chemistry; sodium fluoride; Sodium Fluoride - chemistry; surface morphology; Surface Properties; titanium; Titanium - chemistry
• ISSN: 1748-6041; 1748-605X
• DOI: 10.1088/1748-6041/9/3/035004

We investigate whether a novel and inexpensive etching method, H3PO4 + NaF, on titanium could obtain both a lower hydrogen content and superior calcium phosphate deposition performance, while achieving similar surface roughness in comparison with the traditional etching method. Pure titanium samples were treated with different concentrations of H3PO4 + NaF at ambient temperature without auxiliary implementations (groups A, B and C), and were treated using the traditional method (group T). The samples were then maintained in simulated body fluid for 10 and 20 days. The surface morphology and chemistry, as well as the hydrogen content and distribution, were studied. The hydrogen content of the new groups are in the range of 31 (3.6)-86.9 (7.2) ppm, and that of group T is 287 (13.5) ppm. The amount of deposited calcium phosphates increases as the hydrogen content approaches 90 ppm; however, this trend does not apply as the hydrogen content exceeds 90 ppm. The surface roughnesses of groups A, B and C are in the range of 0.47 (0.01)-0.92 (0.05) µm. The new surface topography regularly transforms, and the surfaces with round pits exert a better effect on the deposition of calcium phosphates than the surfaces with sharp cusps.