Fiber-Bragg-grating-based ultrathin shape sensors displaying single-channel sweeping for minimally invasive surgery

• Published in: Optics and lasers in engineering 2014-08, Vol.59, p.50-55
• Main Authors: Moon, Hyowon, Jeong, Jinwoo, Kang, Sungchul, Kim, Keri, Song, Yong-Won, Kim, Jinseok
• Format: Article
• Language: English
• Subjects: Fiber Bragg gratings; Fiber optic sensors; Fibers; Gratings (spectra); Medical optics instrumentation; Reconstruction; Sampling; Sensors; Surgery; Temperature compensation; Three dimensional
• ISSN: 0143-8166; 1873-0302
• DOI: 10.1016/j.optlaseng.2014.03.005

We report on the development of a highly flexible, thin shape sensor that can be integrated into minimally invasive surgery systems. Three optical fibers are arranged in a triangular shape and epoxy molded to produce a sensor diameter of less than 900μm, ensuring high-bending operation up to 90°. Each fiber contains four fiber Bragg gratings (FBGs) operating at different wavelengths. With simultaneous detection of all the grating signals, the overall curvatures and torsions are interpolated and used for three-dimensional shape reconstruction. Three FBGs located at the same axial location also enables temperature compensation. Real-time shape monitoring with a sampling rate of 3.74Hz is realized. The average tip position error was 1.50% of the total sensor length. •We developed a highly flexible, thin shape sensor with fiber Bragg gratings.•Strain, bending angle, and temperature are extracted and used for shape sensing.•The shape was calculated by Frenet–Serret formula with a sampling rate of 3.74Hz.•The average tip position error was 1.50% of the total sensor length.•The shape sensor was integrated into minimally invasive surgery systems.