Fine PM measurements: personal and indoor air monitoring

• Published in: Chemosphere (Oxford) 2002-12, Vol.49 (9), p.993-1007
• Main Authors: Jantunen, M., Hänninen, O., Koistinen, K., Hashim, J.H.
• Format: Article
• Language: English
• Subjects: Air Movements; Air Pollutants - analysis; Air Pollution, Indoor - analysis; Air. Soil. Water. Waste. Feeding; Analysis methods; Applied sciences; Atmospheric pollution; Automation; Biological and medical sciences; Calibration; Climate; Development needs; Environment. Living conditions; Environmental Monitoring - instrumentation; Environmental Monitoring - methods; Exact sciences and technology; Exposure studies; Humans; Humidity; Indoor sampling; Medical sciences; Particle Size; Particulate monitoring; Personal sampling; Pollution; Pressure; Public health. Hygiene; Public health. Hygiene-occupational medicine; Temperature
• ISSN: 0045-6535; 1879-1298
• DOI: 10.1016/S0045-6535(02)00272-2

This review compiles personal and indoor microenvironment particulate matter (PM) monitoring needs from recently set research objectives, most importantly the NRC published “Research Priorities for Airborne Particulate Matter (1998)”. Techniques and equipment used to monitor PM personal exposures and microenvironment concentrations and the constituents of the sampled PM during the last 20 years are then reviewed. Development objectives are set and discussed for personal and microenvironment PM samplers and monitors, for filter materials, and analytical laboratory techniques for equipment calibration, filter weighing and laboratory climate control. The progress is leading towards smaller sample flows, lighter, silent, independent (battery powered) monitors with data logging capacity to store microenvironment or activity relevant sensor data, advanced flow controls and continuous recording of the concentration. The best filters are non-hygroscopic, chemically pure and inert, and physically robust against mechanical wear. Semiautomatic and primary standard equivalent positive displacement flow meters are replacing the less accurate methods in flow calibration, and also personal sampling flow rates should become mass flow controlled (with or without volumetric compensation for pressure and temperature changes). In the weighing laboratory the alternatives are climatic control (set temperature and relative humidity), and mechanically simpler thermostatic heating, air conditioning and dehumidification systems combined with numerical control of temperature, humidity and pressure effects on flow calibration and filter weighing.