Hybrid carbon fiber composite lattice truss structures

• Published in: Composites. Part A, Applied science and manufacturing Applied science and manufacturing, 2014-10, Vol.65, p.135-147
• Main Authors: George, T., Deshpande, V.S., Wadley, H.N.G.
• Format: Article
• Language: English
• Subjects: A. Carbon fiber; A. Polymer–matrix composites (PMCs); Applied sciences; Carbon fiber reinforced plastics; Carbon fibers; D. Mechanical testing; Exact sciences and technology; Forms of application and semi-finished materials; Laminates; Lattices; Mechanical properties; Polymer industry, paints, wood; Sandwich construction; Strength; Technology of polymers; Trusses; Volume fraction
• ISSN: 1359-835X; 1878-5840
• DOI: 10.1016/j.compositesa.2014.06.011

Carbon fiber reinforced polymer (CFRP) composite sandwich panels with hybrid foam filled CFRP pyramidal lattice cores have been assembled from linear carbon fiber braids and Divinycell H250 polymer foam trapezoids. These have been stitched to 3D woven carbon fiber face sheets and infused with an epoxy resin using a vacuum assisted resin transfer molding process. Sandwich panels with carbon fiber composite truss volumes of 1.5–17.5% of the core volume have been fabricated, and the through-thickness compressive strength and modulus measured, and compared with micromechanical models that establish the relationships between the mechanical properties of the core, its topology and the mechanical properties of the truss and foam. The through thickness modulus and strength of the hybrid cores is found to increase with increasing truss core volume fraction. However, the lattice strength saturates at high CFRP truss volume fraction as the proportion of the truss material contained in the nodes increases. The use of linear carbon fiber braids is shown to facilitate the simpler fabrication of hybrid CFRP structures compared to previously described approaches. Their specific strength, moduli and energy absorption is found to be comparable to those made by alternative approaches.