Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact

• Published in: Materials science & engineering. A, Structural materials : properties, microstructure and processing Structural materials : properties, microstructure and processing, 2014-10, Vol.615, p.373-394
• Main Authors: Boakye Yiadom, Solomon, Khaliq Khan, Abdul, Bassim, Nabil
• Format: Article
• Language: English
• Subjects: Adiabatic shear bands; Applied sciences; Carbides; Condensed matter: structure, mechanical and thermal properties; Cross-disciplinary physics: materials science; rheology; Density; Dislocation sources; Dislocations; Equations of state, phase equilibria, and phase transitions; Exact sciences and technology; General studies of phase transitions; Hardening. Tempering; Heat treatment; High strength steels; HRTEM; Impact; Inhomogeneities; Intersections; Materials science; Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology; Metals. Metallurgy; Microstructure; Nickel chromium molybdenum steels; Nucleation; Phase diagrams and microstructures developed by solidification and solid-solid phase transformations; Physics; Precipitation; Production techniques; TEM; Volume fraction
• ISSN: 0921-5093; 1873-4936
• DOI: 10.1016/j.msea.2014.07.095

While instability may occur homogenously during plastic deformation, the formation of adiabatic shear band (ASBs) does not follow a homogenous instability during impact. Geometrical stress concentration sites and/or microstructural inhomogeneities result in the nucleation and initiation of shear strain localization. In this study, initial microstructural inhomogeneity was found to produce nucleation sites for the initiation of ASBs. It was observed that double misfit interfaces and boundary layers with random arrangement of atomic columns are formed around precipitated carbides and they increase the volume fraction of dislocation sources within the specimens. The AISI 4340 steel specimens which were tempered at the lowest temperature had smaller precipitated carbides with high aspect ratios densely distributed within the matrix and were easily susceptible to the formation of ASBs. As the tempering temperature increased, the relative sizes of the carbides increased with a corresponding reduction in their aspect ratios and their distribution density within the matrix and thus were more resistant to the formation of ASBs. In this study, it is demonstrated that the intersection of an activated dislocation source with the direction of maximum shear (regions of stress concentrations) within the specimens during impact, is a necessary condition for the point of intersection to act as a possible site for the nucleation of ASBs, depending on the rate of dislocation generation, local strain and strain rate. At a constant carbide volume fraction, the higher susceptibility of the tempered specimens to the initiation of ASBs is attributed to the volume fraction of the points of intersection between activated dislocation sources and direction of maximum shear during impact. Additionally, the smaller carbides, with their higher aspect ratios and distribution densities, accentuate the effect of strain gradients and the microstructural inhomogeneities associated with the tempered specimens.