Effects of electron beam irradiation on the structural properties of polylactic acid/polyethylene blends

• Published in: Nuclear instruments & methods in physics research. Section B, Beam interactions with materials and atoms Beam interactions with materials and atoms, 2014-09, Vol.334, p.18-27
• Main Authors: Bee, Soo-Tueen, Ratnam, C.T., Sin, Lee Tin, Tee, Tiam-Ting, Wong, Wai-Kien, Lee, Jiuun-Xiang, Rahmat, A.R.
• Format: Article
• Language: English
• Subjects: Crosslinking; Dosage; Electron beam irradiation; Electron beams; Free radicals; Irradiation; Mechanical properties; Polyethylene; Polyethylenes; Polylactic acid; Polymer blends
• ISSN: 0168-583X; 1872-9584
• DOI: 10.1016/j.nimb.2014.04.024

•Electron beam irradiation on polyethylene (LDPE) and polylactic acid (PLA) blends.•Irradiated PLA/LDPE blends exhibit structural rearrangement to highly ordered structure.•Irradiated PLA/LDPE matrix extends continuity of polymer matrix with larger fibrils diameter. The purpose of this research was to investigate the effects of electron beam irradiation on the properties of polylactic acid (PLA) and low density polyethylene (LDPE) blends. The PLA were compounded with 20–80% LDPE and were exposed to electron beam irradiation dosages of 20–120kGy. The results from gel content and X-ray diffraction analyses showed that the addition of LDPE to PLA effectively increased the gel content and crystallinity. However, an increasing percentage of LDPE reduced the tensile strength and Young’s modulus of the PLA/LDPE samples due to the lower intermolecular bonding of LDPE than of PLA. Moreover, an increase in irradiation dosages gradually decreased the mechanical properties of low-LDPE PLA/LDPE. In contrast, the increasing irradiation dosage enhanced the mechanical properties of higher-LDPE PLA/LDPE. These results indicate that higher amounts of LDPE effectively react with the release of free radicals within the amorphous phase if the blends are subjected to irradiation. The higher amounts of free radicals induce the formation of three-dimensional cross-linked networks in the polymer matrix and thus increase the gel content. The irradiation-induced cross-linking in PLA/LDPE samples improves the mechanical properties and crystallinity by promoting a structural rearrangement of the polymer matrix into a highly ordered structure.