Flow analysis for a double suction centrifugal machine in the pump and turbine operation modes

• Published in: International journal for numerical methods in fluids 2009-09, Vol.61 (2), p.220-236
• Main Authors: González, José, Fernández Oro, Jesús Manuel, Argüelles-Díaz, Katia M., Santolaria, Carlos
• Format: Article
• Language: English
• Subjects: Applied fluid mechanics; Centrifugal pumps; CFD technique; Computational fluid dynamics; Computational methods in fluid dynamics; double suction machine; Equivalence; Exact sciences and technology; experimental data; flow in turbomachines; Fluid dynamics; Fluid flow; Fluids; Fundamental areas of phenomenology (including applications); Hydraulic and pneumatic machinery; incompressible flow; Mathematical analysis; Physics; Pumps; sliding mesh; Turbines
• ISSN: 0271-2091; 1097-0363; 1097-0363
• DOI: 10.1002/fld.1951

A double suction centrifugal machine has been studied, both experimentally and numerically, operating as a pump and as a turbine. Experimentally, the static performance of the machine working as a pump was obtained. These measurements were compared with equivalent numerical results from a URANS calculation. As a second step, the numerical results have been exploited to get detailed information about the flow in both operating modes (pump and turbine). The main goals of the study are, first, the validation of the numerical procedure proposed and second, the possible turbine operation of the impeller, which could point out a wider working range for the machine. The first aspect is handled by detailed analysis in the pump mode, according to previous experience of the research group. The second objective is obtained by using the numerical model to explore the flow fields obtained, when working in an inverse mode. Therefore, the presented results join the use of a numerical methodology and the turbine mode of operation for a centrifugal impeller, providing insight into the flow characteristics. When working as a pump, the flow at the suction side is characterized by the existence of an inlet tongue, which tends to enforce a uniform flow for the nominal conditions. For the turbine mode, flow patterns in the impeller, volute and suction regions are carefully investigated. The influence of the specific geometrical arrangement is also considered for this operation mode. Copyright © 2008 John Wiley & Sons, Ltd.