Comparative study of different desiccant wheel designs

• Published in: Applied thermal engineering 2011-07, Vol.31 (10), p.1613-1620
• Main Authors: Narayanan, R., Saman, W.Y., White, S.D., Goldsworthy, M.
• Format: Article
• Language: English
• Subjects: Applied sciences; Chillers; Compressing; Dehumidification; Desiccant wheel; Desiccants; Design engineering; Energy; Energy. Thermal use of fuels; Evaporative cooling; Exact sciences and technology; Gas-side resistance; Heat transfer; Optimization; Regeneration; Silica gel; Solid-side resistance; Theoretical studies. Data and constants. Metering; Wheels
• ISSN: 1359-4311
• DOI: 10.1016/j.applthermaleng.2011.01.043

Desiccant/evaporative cooling systems offer an environmentally benign alternative to conventional vapor compression chillers. A desiccant wheel is the heart of this heat driven cooling system and it uses a solid desiccant for dehumidification with silica gel being the most widely used. Proper design of the wheel is important for the successful operation of the system and theoretical models are useful tools in predicting the performance and optimizing the design. In this paper, two heat and mass transfer models of a counter flow desiccant wheel, one considering only the gas-side resistance, and the other considering both solid-side and gas-side resistances are developed. The models show good agreement with experimental data. The model is used to conduct a comparative study on the performance of different wheel designs. The study shows that the introduction of an axial cooling section can improve the performance of the wheel considerably. ► Two heat and mass transfer models for a counter flow desiccant wheel are presented. ► Models are validated with published experimental results. ► A comparative study on the performance of different wheel designs is done. ► Counter flow design has better dehumidification performance than parallel flow. ► An axial cooling section improves both dehumidification and cooling performance.