Solidification processes in Cu–Zr–Ag amorphisable alloy system

• Published in: Journal of alloys and compounds 2014-01, Vol.584, p.600-606
• Main Authors: Janovszky, D., Sycheva, A., Tomolya, K., Geiger, J., Solyom, J., Roosz, A.
• Format: Article
• Language: English
• Subjects: Ag–Cu–Zr alloys; ARC MELTING; CALORIMETRY; Cooling rate; Copper; COPPER ALLOYS (40 TO 99.3 CU); Copper base alloys; Cross-disciplinary physics: materials science; rheology; Differential scanning calorimetry; DSC; Exact sciences and technology; Liquids; Liquidus; Liquid–liquid separation; MASTER ALLOYS; Materials science; Phase diagrams and microstructures developed by solidification and solid-solid phase transformations; Physics; Scanning electron microscopy; SOLIDIFICATION; Ternary alloy system; ZIRCONIUM COPPERS
• ISSN: 0925-8388; 1873-4669
• DOI: 10.1016/j.jallcom.2013.09.095

[Display omitted] •Liquidus troughs of Cu–Zr–Ag system were determined based on experimental results.•Microstructures of alloys solidified with increasing cooling rate were investigated.•The m-phase has the lower driving force of nucleation than (CuAg)10Zr7 phase.•Relationship between of formation of BMG and primary phases was investigated. The Cu–Zr–Ag system is one of Cu−Zr based bulk metallic glasses (BMG) that has been in the center of great interest for a long time. This work summarizes results on solidification in the Cu–Zr–Ag ternary alloys and relationship between the cooling rate and their microstructure. The alloys in a wide range of compositions were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC) techniques. The surface of stable liquidus miscibility gap has been presented by isothermal sections in this system. The central part of liquidus projection of the ternary Cu–Zr–Ag system is determined based on the harmonization of experimental results and the calculated phase diagrams. Due to the liquid separation, amorphous/crystalline composites could be obtained with a silver content up to 50at%. The primary solidified phases were identified in different samples cooled with a controlled cooling rate (5K/min), in the arc melting furnace (master alloys) and in a wedge shape mould. It has been shown that the m-phase (or AgCu4Zr) has the lowest and the (CuAg)10Zr7 the highest driving force for nucleation in this system. It has been shown that the glass forming ability depends not only on the properties of atomic constituent but on the phases formed during the solidification of undercooled liquid.