Effect of additives on electrochemical performance of lithium nickel cobalt manganese oxide at high temperature

• Published in: Journal of power sources 2014-05, Vol.253, p.48-54
• Main Authors: Kang, Kyoung Seok, Choi, Suneui, Song, JunHo, Woo, Sang-Gil, Jo, Yong Nam, Choi, Jungkyu, Yim, Taeeun, Yu, Ji-Sang, Kim, Young-Jun
• Format: Article
• Language: English
• Subjects: 1,3-Propane sulfone; Additive; Applied sciences; Cathode; Cathodes; Electrical engineering. Electrical power engineering; Electrochemical analysis; Exact sciences and technology; Internal pressure; Lithium nickel cobalt manganese oxide; Manganese oxides; Materials; Nickel; Oxides; Sulfone; Surface stability; Swelling
• ISSN: 0378-7753; 1873-2755
• DOI: 10.1016/j.jpowsour.2013.12.024

Lithium–nickel–cobalt–manganese oxide, Li[NixCoyMnz]O2 (NCM) is a low-cost cathode material with a high capacity and a moderately high rate capability, however, it still suffers from poor electrochemical performance. In this study, several types of additives are attempted to enhance the surface stability of high-Ni-content (Ni ≥ 60%) cathodes and the most effective additive turns out to be PS. The cycle performance in the presence of 2% PS is much improved at a high temperature of 60 °C: (1) 98.9% of its initial capacity is preserved, (2) the increase in thickness is only 17.9%, preventing undesired swellings, and (3) gases are not generated in large amounts with the internal pressure being 56.4 kPa. The FT-IR spectroscopy results suggest that the surface of the cathode in the presence of 2% PS is covered with a film of alkyl sulfone components (RSOSR and RSO2SR), which is possibly formed by the electrochemical oxidation of PS. The current results confirm that the electrochemical performance of Ni-rich cathodes can be improved via the appropriate use of additives. They also indicate that among the tested additive candidates in this study, PS is highly desirable for enhancing the electrochemical performance of Ni-rich cathodes. •Several types of additives were attempted to enhance the structural stability of high-Ni-content (Ni ≥ 60%) cathodes.•Interpretation of cycle performance in connection with SEM, in situ monitoring of cell pressure, FT-IR, OCV changes.•1,3-Propane sulfone is highly desirable for enhancing the electrochemical performance of Ni-rich cathodes.