Influence of mechanical treatments on the properties of cellulose nanofibers isolated from microcrystalline cellulose

• Published in: Reactive & functional polymers 2014-12, Vol.85, p.134-141
• Main Authors: Bandera, Davide, Sapkota, Janak, Josset, Sébastien, Weder, Christoph, Tingaut, Philippe, Gao, Xin, Foster, E. Johan, Zimmermann, Tanja
• Format: Article
• Language: English
• Subjects: Cellulose; Disintegration; Dispersions; Fillers; Homogenization; Homogenizing; Mechanical properties; Nanofibers; Polymers
• ISSN: 1381-5148
• DOI: 10.1016/j.reactfunctpolym.2014.09.009

The possibility of preparing cellulose whiskers-like materials by mechanical treatment of commercially available microcrystalline cellulose (MCC) was explored. High shear homogenization, grinding with a supermass colloider, and hammer-milling were the processes selected to disintegrate the MCC, which yielded F-MCC, G-MCC and H-MCC, respectively. Processing aqueous dispersions with high solid content allowed for the production of cellulose particles with greatly reduced dimensions. Morphological characterization revealed that homogenization and grinding reduced the particle size more effectively than hammer-milling, although the disintegration was incomplete in all cases. The reinforcing potential of the materials was evaluated against commercially available whiskers by using the various particles as fillers to mechanically reinforce hydroxypropylcellulose. Nanocomposite films containing 5, 10, or 20 wt.% of the filler were prepared and the mechanical properties were characterized. The results show that H-MCCs are just slightly better than the original MCC, whereas F-MCC and G-MCC performed similar to whiskers at 10 wt.% loading, despite the presence of a fraction of micrometer-sized particles. It is therefore reasonable to envision the use of the more easily produced F-MCC and G-MCC as replacement of cellulose whiskers in some applications.