A fracture criterion for the notch strength of high strength steels in the presence of hydrogen

• Published in: Journal of the mechanics and physics of solids 2014-02, Vol.63, p.80-93
• Main Authors: Ayas, C., Deshpande, V.S., Fleck, N.A.
• Format: Article
• Language: English
• Subjects: Bars; Failure; High strength steels; Hydrogen embrittlement; Hydrogen trapping; Lattices; Mathematical analysis; Stress concentration; Stresses; Weakest link statistics
• ISSN: 0022-5096
• DOI: 10.1016/j.jmps.2013.10.002

High strength steels can suffer from a loss of ductility when exposed to hydrogen, and this may lead to sudden failure. The hydrogen is either accommodated in the lattice or is trapped at defects, such as dislocations, grain boundaries and carbides. The challenge is to identify the effect of hydrogen located at different sites upon the drop in tensile strength of a high strength steel. For this purpose, literature data on the failure stress of notched and un-notched steel bars are re-analysed; the bars were tested over a wide range of strain rates and hydrogen concentrations. The local stress state at failure has been determined by the finite element (FE) method, and the concentration of both lattice and trapped hydrogen is predicted using Oriani's theory along with the stress-driven diffusion equation. The experimental data are rationalised in terms of a postulated failure locus of peak maximum principal stress versus lattice hydrogen concentration. This failure locus is treated as a unique material property for the given steel and heat treatment condition. We conclude that the presence of lattice hydrogen increases the susceptibility to hydrogen embrittlement whereas trapped hydrogen has only a negligible effect. It is also found that the observed failure strength of hydrogen charged un-notched bars is less than the peak local stress within the notched geometries. Weakest link statistics are used to account for this stressed volume effect.