Loading…

Two-phase cooling characteristics of mono-dispersed droplets impacted on an upward-facing heated disk

► Boiling characteristics of impacting droplets over a heated disk were studied. ► Two regimes of droplet impact were identified based on the range of Weber numbers. ► At lower Weber numbers, the resulting films are hydrodynamically stable. ► CHF showed significant enhancement due to the film stabil...

Full description

Saved in:
Bibliographic Details
Published in:Experimental thermal and fluid science 2013-01, Vol.44, p.312-322
Main Authors: Mahmoudi, Seyed Reza, Adamiak, Kazimierz, Peter Castle, G.S.
Format: Article
Language:English
Subjects:
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
cited_by cdi_FETCH-LOGICAL-c459t-15d1fc807f2c3decc17f26f4bbcdcb824090bc9c4fd6262edc16bba4a627d1fb3
cites cdi_FETCH-LOGICAL-c459t-15d1fc807f2c3decc17f26f4bbcdcb824090bc9c4fd6262edc16bba4a627d1fb3
container_end_page 322
container_issue
container_start_page 312
container_title Experimental thermal and fluid science
container_volume 44
creator Mahmoudi, Seyed Reza
Adamiak, Kazimierz
Peter Castle, G.S.
description ► Boiling characteristics of impacting droplets over a heated disk were studied. ► Two regimes of droplet impact were identified based on the range of Weber numbers. ► At lower Weber numbers, the resulting films are hydrodynamically stable. ► CHF showed significant enhancement due to the film stability at low Weber numbers. ► Two different CHF correlations for two regimes of impact were proposed. Droplet impact cooling has been shown to be a promising method for high heat flux removal applications. Recent experimental studies have revealed that even higher heat transfer at low mass fluxes and low Weber number can be achieved with only few degrees of superheat. In the present work, mono-dispersed droplet cooling of a horizontal upward facing heated surface was investigated at low Weber numbers. The impact velocity and frequency of free falling stream of droplets were varied through changing the gap between the heated surface and tip of different capillaries, and by variation of the volumetric flow rate (0.5–4.8cc/min). The impact velocity and droplet frequency were varied between 0.28–1.3m/s and 0.5–5 Hz, respectively, using four different capillaries sized between 17g and 22g. The coolant was 25°C deionized water and all the experiments were performed at atmospheric pressure. The time-averaged two-phase characteristic curves were obtained up to the Critical Heat Flux (CHF) regime. Through the extensive set of experiments, two separate correlations are proposed to predict the average CHFs based on the Weber in the range between 3–10 and 10–100, and Strouhal number ranged in the range between 6.35×10−3 and 3.88×10−2 and 1.81×10−3 and 3.86×10−2, respectively. The correlation predicts the average CHFs in both regions with absolute errors less than 20% and 25%, respectively.
doi_str_mv 10.1016/j.expthermflusci.2012.07.003
format article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_1677966856</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0894177712001872</els_id><sourcerecordid>1283651691</sourcerecordid><originalsourceid>FETCH-LOGICAL-c459t-15d1fc807f2c3decc17f26f4bbcdcb824090bc9c4fd6262edc16bba4a627d1fb3</originalsourceid><addsrcrecordid>eNqNkUFr3DAQhUVoINsk_0GHFnqxI2ltyYZcQmjaQKCX9Czk0SirrW25Gm_T_vvabAj0lJ5mYL73Hsxj7IMUpRRSX-1L_D3NO8xD6A8EsVRCqlKYUojtCdvIxrSFUo1-xzaiaatCGmPO2HuivRCiUVJsGD4-p2LaOUIOKfVxfOKwc9nBjDnSHIF4CnxIYyp8pAkzoec-p6nHmXgcppX0PI3cjfwwPbvsi-Bg9dmhW0-L7McFOw2uJ7x8mefs-93nx9uvxcO3L_e3Nw8FVHU7F7L2MkAjTFCw9Qggl02HquvAQ9eoSrSigxaq4LXSCj1I3XWuclqZRdltz9mno--U088D0myHSIB970ZMB7JSG9Nq3dT6bVQ1W11L3coFvT6ikBNRxmCnHAeX_1gp7FqE3dt_i7BrEVYYuxSxyD--JDkC14fsRoj06qGMVG1dr9zdkcPlQ78iZrs44QjoY0aYrU_x_wL_AiL6qlA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1283651691</pqid></control><display><type>article</type><title>Two-phase cooling characteristics of mono-dispersed droplets impacted on an upward-facing heated disk</title><source>ScienceDirect Freedom Collection</source><creator>Mahmoudi, Seyed Reza ; Adamiak, Kazimierz ; Peter Castle, G.S.</creator><creatorcontrib>Mahmoudi, Seyed Reza ; Adamiak, Kazimierz ; Peter Castle, G.S.</creatorcontrib><description>► Boiling characteristics of impacting droplets over a heated disk were studied. ► Two regimes of droplet impact were identified based on the range of Weber numbers. ► At lower Weber numbers, the resulting films are hydrodynamically stable. ► CHF showed significant enhancement due to the film stability at low Weber numbers. ► Two different CHF correlations for two regimes of impact were proposed. Droplet impact cooling has been shown to be a promising method for high heat flux removal applications. Recent experimental studies have revealed that even higher heat transfer at low mass fluxes and low Weber number can be achieved with only few degrees of superheat. In the present work, mono-dispersed droplet cooling of a horizontal upward facing heated surface was investigated at low Weber numbers. The impact velocity and frequency of free falling stream of droplets were varied through changing the gap between the heated surface and tip of different capillaries, and by variation of the volumetric flow rate (0.5–4.8cc/min). The impact velocity and droplet frequency were varied between 0.28–1.3m/s and 0.5–5 Hz, respectively, using four different capillaries sized between 17g and 22g. The coolant was 25°C deionized water and all the experiments were performed at atmospheric pressure. The time-averaged two-phase characteristic curves were obtained up to the Critical Heat Flux (CHF) regime. Through the extensive set of experiments, two separate correlations are proposed to predict the average CHFs based on the Weber in the range between 3–10 and 10–100, and Strouhal number ranged in the range between 6.35×10−3 and 3.88×10−2 and 1.81×10−3 and 3.86×10−2, respectively. The correlation predicts the average CHFs in both regions with absolute errors less than 20% and 25%, respectively.</description><identifier>ISSN: 0894-1777</identifier><identifier>EISSN: 1879-2286</identifier><identifier>DOI: 10.1016/j.expthermflusci.2012.07.003</identifier><language>eng</language><publisher>Amsterdam: Elsevier Inc</publisher><subject>Applied sciences ; Capillaries ; Cooling ; Correlation ; Critical heat flux ; Droplet cooling ; Droplets ; Energy ; Energy. Thermal use of fuels ; Exact sciences and technology ; Heat flux ; Heat transfer ; Impact velocity ; Strouhal number ; Theoretical studies. Data and constants. Metering ; Weber number</subject><ispartof>Experimental thermal and fluid science, 2013-01, Vol.44, p.312-322</ispartof><rights>2012 Elsevier Inc.</rights><rights>2014 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c459t-15d1fc807f2c3decc17f26f4bbcdcb824090bc9c4fd6262edc16bba4a627d1fb3</citedby><cites>FETCH-LOGICAL-c459t-15d1fc807f2c3decc17f26f4bbcdcb824090bc9c4fd6262edc16bba4a627d1fb3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27924,27925</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&amp;idt=27129553$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Mahmoudi, Seyed Reza</creatorcontrib><creatorcontrib>Adamiak, Kazimierz</creatorcontrib><creatorcontrib>Peter Castle, G.S.</creatorcontrib><title>Two-phase cooling characteristics of mono-dispersed droplets impacted on an upward-facing heated disk</title><title>Experimental thermal and fluid science</title><description>► Boiling characteristics of impacting droplets over a heated disk were studied. ► Two regimes of droplet impact were identified based on the range of Weber numbers. ► At lower Weber numbers, the resulting films are hydrodynamically stable. ► CHF showed significant enhancement due to the film stability at low Weber numbers. ► Two different CHF correlations for two regimes of impact were proposed. Droplet impact cooling has been shown to be a promising method for high heat flux removal applications. Recent experimental studies have revealed that even higher heat transfer at low mass fluxes and low Weber number can be achieved with only few degrees of superheat. In the present work, mono-dispersed droplet cooling of a horizontal upward facing heated surface was investigated at low Weber numbers. The impact velocity and frequency of free falling stream of droplets were varied through changing the gap between the heated surface and tip of different capillaries, and by variation of the volumetric flow rate (0.5–4.8cc/min). The impact velocity and droplet frequency were varied between 0.28–1.3m/s and 0.5–5 Hz, respectively, using four different capillaries sized between 17g and 22g. The coolant was 25°C deionized water and all the experiments were performed at atmospheric pressure. The time-averaged two-phase characteristic curves were obtained up to the Critical Heat Flux (CHF) regime. Through the extensive set of experiments, two separate correlations are proposed to predict the average CHFs based on the Weber in the range between 3–10 and 10–100, and Strouhal number ranged in the range between 6.35×10−3 and 3.88×10−2 and 1.81×10−3 and 3.86×10−2, respectively. The correlation predicts the average CHFs in both regions with absolute errors less than 20% and 25%, respectively.</description><subject>Applied sciences</subject><subject>Capillaries</subject><subject>Cooling</subject><subject>Correlation</subject><subject>Critical heat flux</subject><subject>Droplet cooling</subject><subject>Droplets</subject><subject>Energy</subject><subject>Energy. Thermal use of fuels</subject><subject>Exact sciences and technology</subject><subject>Heat flux</subject><subject>Heat transfer</subject><subject>Impact velocity</subject><subject>Strouhal number</subject><subject>Theoretical studies. Data and constants. Metering</subject><subject>Weber number</subject><issn>0894-1777</issn><issn>1879-2286</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2013</creationdate><recordtype>article</recordtype><recordid>eNqNkUFr3DAQhUVoINsk_0GHFnqxI2ltyYZcQmjaQKCX9Czk0SirrW25Gm_T_vvabAj0lJ5mYL73Hsxj7IMUpRRSX-1L_D3NO8xD6A8EsVRCqlKYUojtCdvIxrSFUo1-xzaiaatCGmPO2HuivRCiUVJsGD4-p2LaOUIOKfVxfOKwc9nBjDnSHIF4CnxIYyp8pAkzoec-p6nHmXgcppX0PI3cjfwwPbvsi-Bg9dmhW0-L7McFOw2uJ7x8mefs-93nx9uvxcO3L_e3Nw8FVHU7F7L2MkAjTFCw9Qggl02HquvAQ9eoSrSigxaq4LXSCj1I3XWuclqZRdltz9mno--U088D0myHSIB970ZMB7JSG9Nq3dT6bVQ1W11L3coFvT6ikBNRxmCnHAeX_1gp7FqE3dt_i7BrEVYYuxSxyD--JDkC14fsRoj06qGMVG1dr9zdkcPlQ78iZrs44QjoY0aYrU_x_wL_AiL6qlA</recordid><startdate>20130101</startdate><enddate>20130101</enddate><creator>Mahmoudi, Seyed Reza</creator><creator>Adamiak, Kazimierz</creator><creator>Peter Castle, G.S.</creator><general>Elsevier Inc</general><general>Elsevier</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7QH</scope><scope>7UA</scope><scope>C1K</scope><scope>F1W</scope><scope>H96</scope><scope>L.G</scope><scope>7TB</scope><scope>7U5</scope><scope>8FD</scope><scope>FR3</scope><scope>H8D</scope><scope>KR7</scope><scope>L7M</scope></search><sort><creationdate>20130101</creationdate><title>Two-phase cooling characteristics of mono-dispersed droplets impacted on an upward-facing heated disk</title><author>Mahmoudi, Seyed Reza ; Adamiak, Kazimierz ; Peter Castle, G.S.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c459t-15d1fc807f2c3decc17f26f4bbcdcb824090bc9c4fd6262edc16bba4a627d1fb3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2013</creationdate><topic>Applied sciences</topic><topic>Capillaries</topic><topic>Cooling</topic><topic>Correlation</topic><topic>Critical heat flux</topic><topic>Droplet cooling</topic><topic>Droplets</topic><topic>Energy</topic><topic>Energy. Thermal use of fuels</topic><topic>Exact sciences and technology</topic><topic>Heat flux</topic><topic>Heat transfer</topic><topic>Impact velocity</topic><topic>Strouhal number</topic><topic>Theoretical studies. Data and constants. Metering</topic><topic>Weber number</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Mahmoudi, Seyed Reza</creatorcontrib><creatorcontrib>Adamiak, Kazimierz</creatorcontrib><creatorcontrib>Peter Castle, G.S.</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Aqualine</collection><collection>Water Resources Abstracts</collection><collection>Environmental Sciences and Pollution Management</collection><collection>ASFA: Aquatic Sciences and Fisheries Abstracts</collection><collection>Aquatic Science &amp; Fisheries Abstracts (ASFA) 2: Ocean Technology, Policy &amp; Non-Living Resources</collection><collection>Aquatic Science &amp; Fisheries Abstracts (ASFA) Professional</collection><collection>Mechanical &amp; Transportation Engineering Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><collection>Aerospace Database</collection><collection>Civil Engineering Abstracts</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Experimental thermal and fluid science</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Mahmoudi, Seyed Reza</au><au>Adamiak, Kazimierz</au><au>Peter Castle, G.S.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Two-phase cooling characteristics of mono-dispersed droplets impacted on an upward-facing heated disk</atitle><jtitle>Experimental thermal and fluid science</jtitle><date>2013-01-01</date><risdate>2013</risdate><volume>44</volume><spage>312</spage><epage>322</epage><pages>312-322</pages><issn>0894-1777</issn><eissn>1879-2286</eissn><abstract>► Boiling characteristics of impacting droplets over a heated disk were studied. ► Two regimes of droplet impact were identified based on the range of Weber numbers. ► At lower Weber numbers, the resulting films are hydrodynamically stable. ► CHF showed significant enhancement due to the film stability at low Weber numbers. ► Two different CHF correlations for two regimes of impact were proposed. Droplet impact cooling has been shown to be a promising method for high heat flux removal applications. Recent experimental studies have revealed that even higher heat transfer at low mass fluxes and low Weber number can be achieved with only few degrees of superheat. In the present work, mono-dispersed droplet cooling of a horizontal upward facing heated surface was investigated at low Weber numbers. The impact velocity and frequency of free falling stream of droplets were varied through changing the gap between the heated surface and tip of different capillaries, and by variation of the volumetric flow rate (0.5–4.8cc/min). The impact velocity and droplet frequency were varied between 0.28–1.3m/s and 0.5–5 Hz, respectively, using four different capillaries sized between 17g and 22g. The coolant was 25°C deionized water and all the experiments were performed at atmospheric pressure. The time-averaged two-phase characteristic curves were obtained up to the Critical Heat Flux (CHF) regime. Through the extensive set of experiments, two separate correlations are proposed to predict the average CHFs based on the Weber in the range between 3–10 and 10–100, and Strouhal number ranged in the range between 6.35×10−3 and 3.88×10−2 and 1.81×10−3 and 3.86×10−2, respectively. The correlation predicts the average CHFs in both regions with absolute errors less than 20% and 25%, respectively.</abstract><cop>Amsterdam</cop><pub>Elsevier Inc</pub><doi>10.1016/j.expthermflusci.2012.07.003</doi><tpages>11</tpages></addata></record>
fulltext fulltext
identifier ISSN: 0894-1777
ispartof Experimental thermal and fluid science, 2013-01, Vol.44, p.312-322
issn 0894-1777
1879-2286
language eng
recordid cdi_proquest_miscellaneous_1677966856
source ScienceDirect Freedom Collection
subjects Applied sciences
Capillaries
Cooling
Correlation
Critical heat flux
Droplet cooling
Droplets
Energy
Energy. Thermal use of fuels
Exact sciences and technology
Heat flux
Heat transfer
Impact velocity
Strouhal number
Theoretical studies. Data and constants. Metering
Weber number
title Two-phase cooling characteristics of mono-dispersed droplets impacted on an upward-facing heated disk
url http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-05T03%3A10%3A14IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Two-phase%20cooling%20characteristics%20of%20mono-dispersed%20droplets%20impacted%20on%20an%20upward-facing%20heated%20disk&rft.jtitle=Experimental%20thermal%20and%20fluid%20science&rft.au=Mahmoudi,%20Seyed%20Reza&rft.date=2013-01-01&rft.volume=44&rft.spage=312&rft.epage=322&rft.pages=312-322&rft.issn=0894-1777&rft.eissn=1879-2286&rft_id=info:doi/10.1016/j.expthermflusci.2012.07.003&rft_dat=%3Cproquest_cross%3E1283651691%3C/proquest_cross%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-c459t-15d1fc807f2c3decc17f26f4bbcdcb824090bc9c4fd6262edc16bba4a627d1fb3%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_pqid=1283651691&rft_id=info:pmid/&rfr_iscdi=true