Atomic-scale microstructures, Raman spectra and dielectric properties of cubic pyrochlore-typed Bi1.5MgNb1.5O7 dielectric ceramics

• Published in: Ceramics international 2014-07, Vol.40 (6), p.8125-8134
• Main Authors: Li, Yangyang, Zhu, Xinhua, Kassab, T.A.
• Format: Article
• Language: English
• Subjects: Atomic structure; Bi1.5MgNb1.5O7 (BMN); C. Dielectric properties; Ceramics; Deviation; Dielectric ceramics; Dielectric constant; Dielectric properties; Frequency ranges; Grains; Microstructures; Pyrochlore structure; Pyrochlores
• ISSN: 0272-8842; 1873-3956
• DOI: 10.1016/j.ceramint.2014.01.007

Single-phase cubic pyrochlore-typed Bi1.5MgNb1.5O7 (BMN) dielectric ceramics were synthesized at temperatures of 1050–1200°C by solid-state reaction method. Their atomic-scale microstructures and dielectric properties were investigated. X-ray diffraction patterns revealed that the BMN ceramics had an average cubic pyrochlore structure, whereas the Raman spectra indicated that they had an essentially cubic symmetry with small local deviations at the A and O' sites of the cubic pyrochlore structure. This was confirmed by selected electron area diffraction (SAED) patterns, where the reflections of {442} (not allowed in the cubic pyrochlore with Fd3¯m symmetry) were clearly observed. SEM and TEM images revealed that the average grain size was increased with the sintering temperature, and an un-homogeneous grain growth was observed at high temperatures. HRTEM images and SAED patterns revealed the single-crystalline nature of the BMN ceramic grains. Energy dispersive spectroscopy (EDS) elemental mapping studies indicated that the compositional distributions of Bi, Mg, Nb and O elements in the ceramic grains were homogenous, and no elemental precipitation was observed at the grain boundary. Quantitative EDS data on ceramic grains revealed the expected cationic stoichiometry based on the initial composition of Bi1.5MgNb1.5O7. Dielectric constants of all the BMN samples exhibited almost frequency independent characteristic in the frequency range of 102–106Hz, and the highest value was 195 for the BMN ceramics sintered at sintered at 1150°C with the highest bulk density. The dielectric losses were stable and less than 0.002 in the frequency range of 102–105Hz. The high dielectric constants of the present BMN samples can be ascribed to the local atomic deviations at the A and O' sites from the ideal atomic positions of the pyrochlore structure, which affect the different polarization mechanisms in the BMN ceramics, and which in turn enhance the dielectric constants of the BMN ceramic samples.