Thermal and kinetic behaviors of biomass and plastic wastes in co-pyrolysis

• Published in: Energy conversion and management 2013-11, Vol.75, p.263-270
• Main Authors: Cepeliogullar, Oe, Puetuen, A E
• Format: Article
• Language: English
• Subjects: Applied sciences; Biomass; Blends; Chlorides; Co-pyrolysis; Energy; Exact sciences and technology; Kinetics; Natural energy; Plastic; Polyethylene terephthalates; Polymer blends; Polyvinyl chlorides; Pyrolysis; Temperature; TGA; Thermal decomposition
• ISSN: 0196-8904; 1879-2227
• DOI: 10.1016/j.enconman.2013.06.036

•Co-pyrolysis of biomass together with the plastic wastes in thermogravimetric analyzer.•Investigations into thermal and kinetic behaviors at high temperature regions.•Determination of the kinetic parameters. In this study, co-pyrolysis characteristics and kinetics of biomass-plastic blends were investigated. Cotton stalk, hazelnut shell, sunflower residue, and arid land plant Euphorbia rigida, were blended in definite ratio (1:1, w/w) with polyvinyl chloride (PVC) and polyethylene terephthalate (PET). Experiments were conducted with a heating rate of 10°Cmin−1 from room temperature to 800°C in the presence of N2 atmosphere with a flow rate of 100cm3min−1. After thermal decomposition in TGA, a kinetic analysis was performed to fit thermogravimetric data and a detailed discussion of co-pyrolysis mechanism was achieved. Experimental results demonstrated that the structural differences between biomass and plastics directly affect their thermal decomposition behaviors. Biomass pyrolysis generally based on three main steps while plastic material’s pyrolysis mechanism resulted in two steps for PET and three steps for PVC. Also, the required activation energies needed to achieve the thermal degradation for plastic were found higher than the biomass materials. In addition, it can be concluded that the evaluation of plastic materials together with biomass created significant changes not only for the thermal behaviors but also for the kinetic behaviors.