Density measurements as a condition monitoring approach for following the aging of nuclear power plant cable materials

• Published in: Radiation physics and chemistry (Oxford, England : 1993) England : 1993), 1999-10, Vol.56 (4), p.429-447
• Main Authors: Gillen, K.T., Celina, M., Clough, R.L.
• Format: Article
• Language: English
• Subjects: aging; Aging: Ageing; cables; Density; Diffusion-limited oxidation; insulation; Polymers; Radiation
• ISSN: 0969-806X; 1879-0895
• DOI: 10.1016/S0969-806X(99)00333-3

Monitoring changes in material density has been suggested as a potentially useful condition monitoring (CM) method for following the aging of cable jacket and insulation materials in nuclear power plants. In this study, we compare density measurements and ultimate tensile elongation results versus aging time for most of the important generic types of commercial nuclear power plant cable materials. Aging conditions, which include thermal-only, as well as combined radiation plus thermal, were chosen such that potentially anomalous effects caused by diffusion-limited oxidation (DLO) are unimportant. The results show that easily measurable density increases occur in most important cable materials. For some materials and environments, the density change occurs at a fairly constant rate throughout the mechanical property lifetime. For cases involving so-called induction-time behavior, density increases are slow to moderate until after the induction time, at which point they begin to increase dramatically. In other instances, density increases rapidly at first, then slows down. The results offer strong evidence that density measurements, which reflect property changes under both radiation and thermal conditions, could represent a very useful CM approach.