Study of the effects of cubic nonlinear damping on vibration isolations using Harmonic Balance Method

• Published in: International journal of non-linear mechanics 2012-12, Vol.47 (10), p.1073-1080
• Main Authors: Peng, Z.K., Meng, G., Lang, Z.Q, Zhang, W.M., Chu, F.L.
• Format: Article
• Language: English
• Subjects: Damping; Displacement; Excitation; Harmonic balance method; Isolators; Linear damping; Nonlinear damping; Nonlinearity; Transmissibility; Vibration isolators
• ISSN: 0020-7462; 1878-5638
• DOI: 10.1016/j.ijnonlinmec.2011.09.013

In the present study, Harmonic Balance Method (HBM) is applied to investigate the performance of passive vibration isolators with cubic nonlinear damping. The results reveal that introducing either cubic nonlinear damping or linear damping could significantly reduce both the displacement transmissibility and the force transmissibility of the isolators over the resonance region. However, at the non-resonance region where frequency is lower than the resonant frequency, both the linear damping and the cubic nonlinear damping have almost no effect on the isolators. At the non-resonance region with higher frequency, increasing the linear damping has almost no effects on the displacement transmissibility but could raise the force transmissibility. In addition, the influence of the cubic nonlinear damping on the isolators is dependent on the type of the disturbing force. If the strength of the disturbing force is constant and independent of the excitation frequency, then the effect of cubic nonlinear damping on both the force and displacement transmissibility would be negligible. But, when the strength of the disturbing force is dependent of the excitation frequency, increasing the cubic nonlinear damping could slightly reduce the relative displacement transmissibility and increase the absolute displacement transmissibility but could significantly increase the force transmissibility. These conclusions are of significant importance in the analysis and design of nonlinear passive vibration isolators. ► We investigated the performance of passive vibration isolators with cubic nonlinear damping. ► Increasing linear damping could reduce the force transmissibility over the resonance region. ► Increasing linear damping could raise the force transmissibility at higher frequency region. ► Cubic nonlinear damping affects the transmissibility significantly over resonance region. ► Cubic nonlinear damping has no effect on the transmissibility at non-resonance region.