Effect of sludge retention time on inclined plate function, treatment performance and sludge characteristics of inclined plate membrane bioreactors treating municipal wastewater

• Published in: Water and environment journal : WEJ 2015-09, Vol.29 (3), p.346-352
• Main Authors: Ittisupornrat, Suda, Tobino, Tomohiro, Yamamoto, Kazuo
• Format: Article
• Language: English
• Subjects: inclined plate; membrane bioreactor; municipal wastewater treatment; sludge retention time
• ISSN: 1747-6585; 1747-6593
• DOI: 10.1111/wej.12128

Two identical bench scale inclined plate membrane bioreactors (ip‐MBRs) were operated for the treatment of real municipal wastewater for 1 year. Sludge retention time (SRT) was varied over the course of operation to investigate the effects on inclined plate function, treatment performance and sludge characteristic. Removal rates of chemical oxygen demand and ammonia over 90% and of total nitrogen (TN) more than 70% were achieved when ip‐MBRs were operated under SRTs between infinite and 40 days while short SRT (20 days) negatively affected TN removal. When the sludge concentration in anoxic tank exceeded 15 g/L, the failure of the inclined plate function was observed, resulting in no difference in sludge concentrations between aerobic and anoxic tanks. To avoid severe effects on inclined plate function and treatment performance, an SRT range of 40–80 days was recommended for ip‐MBRs. Moreover, sludge floc size under prolonged SRT became smaller than that under short SRT due to increased attrition among the sludge floc particles caused by strong aeration needed for keeping a sufficient dissolved oxygen level.