Efficient removal of mercury from aqueous solutions and industrial effluent

• Published in: Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering Toxic/hazardous substances & environmental engineering, 2015-10, Vol.50 (12), p.1230-1240
• Main Authors: Dos Santos, Maria B. P., Leal, Katia Z., Oliveira, Fernando J. S., Sella, Silvia M., Vieira, Méri D., Marques, Elisa M. D., Gomes, Vanessa A. C.
• Format: Article
• Language: English
• Subjects: Adsorbents; Adsorption; Aqueous solutions; Brazil; Constants; Cost-Benefit Analysis; Effluents; Hydrogen-Ion Concentration; Industrial effluent treatment; Industrial Waste - analysis; industrial waste reuse; low cost sorbent; mercurial effluent; Mercury; Mercury (metal); Mercury - isolation & purification; Nutrient removal; ornamental rock solid waste; Rocks; Solid wastes; Sorption; Temperature; Waste Water - analysis; Water Pollutants, Chemical - isolation & purification; Water Purification - economics; Water Purification - methods; Water treatment
• ISSN: 1093-4529; 1532-4117
• DOI: 10.1080/10934529.2015.1055147

The objective of this study was to examine the ability of a solid waste produced during beneficiation of ornamental rocks to remove mercury (Hg) from an industrial effluent and aqueous solutions under various conditions. Batch studies have been carried out by observing the effects of pH, concentration of the adsorbate, contact time, and so on. Various sorption isotherm models such as Langmuir, Freundlich, and Tóth have been applied for the adsorbent. Film and intraparticle diffusion were both found to be rate-limiting steps. Adsorption was properly described by the Freundlich model (capacity constant of 0.3090 (mg g −1 )(mg L −1 ) −1/n and adsorption intensity indicator of 2.2939), which indicated a favorable sorption and encouraged subsequent studies for treatment of Hg-containing industrial effluent. Industrial effluent treatment efficiency reached Hg removals greater than 90% by using ornamental rock solid waste (ORSW). Besides, desorption studies indicated that the maximum recovery of mercury was 100 ± 2% for 1 mol L −1 HNO 3 and 74 ± 8% for 0.1 mol L −1 HNO 3 . The ORSW could be reused thrice without significant difference on the Hg removal rate from industrial effluent. These findings place ORSW as a promising efficient and low-cost adsorbent for the removal of Hg from aqueous solutions and industrial effluent.