Magnetically induced electrodeposition of Zn―Ni alloy coatings and their corrosion behaviors

• Published in: Journal of magnetism and magnetic materials 2013-11, Vol.345, p.48-54
• Main Authors: RAO, Vaishaka R, BANGERA, Kasturi V, HEGDE, A. Chitharanjan
• Format: Article
• Language: English
• Subjects: Alloy development; Applied sciences; Coatings; Corrosion; Corrosion prevention; Corrosion resistance; Cross-disciplinary physics: materials science; rheology; Deposition; Electrodeposition, electroplating; Exact sciences and technology; Intermetallic compounds; Magnetic fields; Materials science; Metals. Metallurgy; Methods of deposition of films and coatings; film growth and epitaxy; Orientation; Physics; Protective coatings; Zinc base alloys
• ISSN: 0304-8853
• DOI: 10.1016/j.jmmm.2013.06.014

The less magnetic features of Zn-Ni alloy compared to Fe-Ni and Fe-Co alloys made it interesting to develop them under the influence of applied magnetic field. In this regard, the effects of a magnetic field (B) applied in a direction parallel and perpendicular to the nominal current, during electrodeposition process of Zn-Ni alloy have been investigated by means of X-ray diffraction and EDX analysis. The modification of crystal orientation by superimposition of a varying magnetic field is studied for alloys of constant nickel content (8 a%), deposited at optimal current density (j) of 3.0 A dm(-2). The effect of magnetic field on crystallographic orientation and hence the corrosion behaviors of the coatings were studied. The preferential orientations (101) and (002) of the zinc phase and (330) phi -Ni(5)Zn(21) phase are always favored to exist with parallel and perpendicular magnetic field. The preferential (321) phi -Ni(5)Zn(21)orientation is found to be the characteristic of perpendicular magnetic field. Further, Zn (100) orientation is found to be non-responsive to the effect of parallel magnetic field. The coatings developed using perpendicular magnetic field is more corrosion resistant compare to that for parallel magnetic field. This is attributed to the additional (321) phi -Ni(5)Zn(21)orientations. The changes in the phase structure of the coatings deposited at different magnetic field are attributed to the effect caused by the magnetic convection induced in the electrolytic solution, called MHD effect (magneto-hydrodynamic effect). The chemical composition of the alloy was found to be same in both natural and magnetically induced deposition due to constant Ni content in the bath. The variation in the surface morphology of the coatings was studied by scanning electron microscopy (SEM). The Zn-Ni alloy coating deposited at 0.8 T perpendicular B showed the highest corrosion resistance (with corrosion rate=0.26 x 10(-2) mmy(-1)) compared to the one with no B (corrosion rate = 14.46 x 10(-2) mm gamma (-1)). The improved corrosion resistance of the coatings was discussed in the light of magnetic field effect on crystallographic orientation.