3D Amorphous Silicon on Nanopillar Copper Electrodes as Anodes for High-Rate Lithium-Ion Batteries

We present an amorphous Si anode deposited on a Cu nanopillar current collector, fabricated using a thermal roll-to-roll process followed by electroformation and LPCVD, for application in high-rate Li-ion batteries. Cu nanopillar current collectors with diameters of 250 and 500 nm were patterned per...

Full description

Saved in:
Bibliographic Details
Published in:ACS nano 2014-02, Vol.8 (2), p.1907-1912
Main Authors: Kim, Gyutae, Jeong, Sookyung, Shin, Ju-Hyeon, Cho, Jaephil, Lee, Heon
Format: Article
Language:English
Subjects:
Accumulators
Amorphous silicon
AMORPHOUS STRUCTURE
ANODES
BATTERIES
Collectors
Copper
Electrodes
ELECTROFORMING
Lithium-ion batteries
MICROSTRUCTURES
Nanostructure
Three dimensional
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:We present an amorphous Si anode deposited on a Cu nanopillar current collector, fabricated using a thermal roll-to-roll process followed by electroformation and LPCVD, for application in high-rate Li-ion batteries. Cu nanopillar current collectors with diameters of 250 and 500 nm were patterned periodically with 1 μm pitch and 2 μm height to optimize the diameters of the pillars for better electrochemical performance. Void spaces between Cu nanopillars allowed not only greater effective control of the strain caused by the Si expansion during lithiation than that allowed by a nonpatterned electrode but also significantly improved cycle performance even at 20 C measured after the same rate test: After 100 cycles at 0.5 C, the patterned electrodes with 250 and 500 nm diameter nanopillars showed high capacity retentions of 86% and 84%, respectively. These electrodes retained discharge capacities of 1057 and 780 mAh/g even at 20 C, respectively.
ISSN:1936-0851
1936-086X
DOI:10.1021/nn406464c