Influence of multi walled carbon nanotubes reinforcement and gamma irradiation on the wear behaviour of UHMWPE

• Published in: Wear 2015-07, Vol.334-335, p.82-90
• Main Authors: Sreekanth, P.S. Rama, Kanagaraj, S.
• Format: Article
• Language: English
• Subjects: Gamma irradiation; Gamma rays; Hardness; Irradiation; MWCNTs; Polyethylenes; Polymer matrix composites; Polymer–matrix composite; Sliding wear; Wear; Wear resistance
• ISSN: 0043-1648; 1873-2577
• DOI: 10.1016/j.wear.2014.12.014

Ultra high molecular weight polyethylene (UHMWPE) was reinforced by chemically treated multi walled carbon nanotubes (MWCNTs) up to 2.0wt% and later subjected to gamma irradiation up to 100kGy dose. The influence of MWCNTs on the hardness and wear resistance of UHMWPE was evaluated before and after the irradiation process. The hardness of UHMWPE was increased by 89% by homogeneous dispersion of 2wt% MWCNTs and 100kGy irradiation. Wear studies on the test samples revealed that the wear volume of unirradiated UHMWPE was reduced by 31%, 54% and 73% upon dispersing 2wt% MWCNTs, 100kGy irradiation and the combination of both, respectively. The surface morphology and topography of the wear tracks were examined to understand the wear mechanisms of UHMWPE and its composites. Though the wear mechanism observed in the polymer and composites under normal and irradiated condition is found to be the same, the severity of wear was found to be reduced for irradiated composites compared to unirradiated UHMWPE. The crosslink density (CLD) of composites was found to be higher than that of UHMWPE. It is concluded that the cumulative effect of the presence of MWCNTs and irradiation effectively increased the wear resistance of UHMWPE. •The wear mechanisms involved in UHMWPE/MWCNTs composites have been identified.•The crosslink density of composites increased with MWCNTs concentration, which influence the wear phenomena.•The synergy between, irradiation and MWCNT reinforcement on wear performance have been investigated.