Quasi-static and high strain rate response of aluminum matrix syntactic foams under compression

• Published in: Composites. Part A, Applied science and manufacturing Applied science and manufacturing, 2015-12, Vol.79, p.82-91
• Main Authors: Myers, Kyle, Katona, Bálint, Cortes, Pedro, Orbulov, Imre Norbert
• Format: Article
• Language: English
• Subjects: A. Foams; Aluminum base alloys; B. Fracture; B. Mechanical properties; Chemical composition; Compressive strength; D. Mechanical testing; Foams; Heat treatment; High strain rate; Strain rate; Syntactic foams
• ISSN: 1359-835X; 1878-5840
• DOI: 10.1016/j.compositesa.2015.09.018

Aluminum alloy matrix syntactic foams were produced by inert gas pressure infiltration. Four different alloys and ceramic hollow spheres were applied as matrix and filler material, respectively. The effects of the chemical composition of the matrix and the different heat-treatments are reported at different strain-rates and in compressive loadings. The higher strain rates were performed in a Split-Hopkinson pressure bar system. The results show that, the characteristic properties of the materials strongly depends on the chemical composition of the matrix and its heat-treatment condition. The compressive strength of the investigated foams showed a limited sensitivity to the strain rate, its effect was more pronounced in the case of the structural stiffness and fracture strain. The failure modes of the foams have explicit differences showing barreling and shearing in the case of quasi-static and high strain rate compression respectively.