Fabric‐hydrogel composite membranes for culturing microalgae in semipermeable membrane‐based photobioreactors

• Published in: Journal of polymer science. Part A, Polymer chemistry Polymer chemistry, 2016, Vol.54 (1), p.108-114
• Main Authors: Lee, Seung‐Yong, Kim, Z‐Hun, Oh, Hwa Yeon, Choi, Younghoon, Park, Hanwool, Jung, Daewoo, Kim, Jong‐Min, Na, Yang Ho, Lim, Sang‐Min, Lee, Choul‐Gyun, Lee, Jin‐Kyun
• Format: Article
• Language: English
• Subjects: Algae; algae culture; biodiesel; bioreactors; Broths; Coefficients; composite; Concentration (composition); Construction materials; Cotton; cotton fabric; Crosslinking; Culture; culture media; Design analysis; Diesel; Dissolution; Ethylene glycol; fabric; fabric; hydrogel; Fabrics; Gauze; hydrocolloids; hydrogel; Hydrogels; ingredients; Ion concentration; ions; Marine environment; membrane; Membranes; microalgae; microalgae; photobioreactor; semipermeable membrane; Monomers; nitrates; Nutrients; Permeability; photobioreactor; polyethylene glycol; Seawater; semipermeable membrane; surface area; Swelling; Tensile strength; Transport properties
• ISSN: 0887-624X; 1099-0518
• DOI: 10.1002/pola.27770

In this article, we demonstrate that hydrogel‐based composite membranes are used as semipermeable materials for the construction of photobioreactors (PBRs). PBRs are developed to culture microalgae using nutrients dissolved in seawater, and thus they need to be fabricated with membranes possessing sufficient material‐transport properties. While hydrogels are characterized by their highly swelling nature in water and therefore have desirable transport of dissolved matter, they lack the mechanical strength to be cast into thin structures of large surface area. This issue motivated us to design a new concept, i.e., fabric‐hydrogel composite membranes (FHCMs). A cotton fabric inside the hydrogel matrix endows the composite with tensile strength, which enables casting of FHCMs into thin membranes. Several FHCMs were prepared with 2‐hydroxyethyl methacrylate (HEMA), cross‐linking poly(ethylene glycol) dimethacrylate (PEGDMA) and a sheet of gauze by controlling the composition of the monomers and water. In the permeability measurement of nitrate ions, a key ingredient for the growth of microalgae, the permeability coefficient reached as high as 1.2 x 10⁻⁸ m² min⁻¹, which is roughly three times higher than that of a commercially available semipermeable membrane (3.3 x 10⁻⁹ m² min⁻¹). In the following evaluation of microalgal culture, a PBR constructed with a FHCM was able to maintain sufficient NO3− ion concentration and pH of the culture broth, supporting microalgal growth. These results suggest that the composite membranes with hydrogel and fabric have potential in the application of microalgal culture for bio‐diesel production in a marine environment. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 108–114