Combination of microscopic model and VoF-multiphase approach for numerical simulation of nodular cast iron solidification

• Published in: IOP conference series. Materials Science and Engineering 2015-06, Vol.84 (1), p.12024
• Main Authors: Subasic, E, Huang, C, Jakumeit, J, Hediger, F
• Format: Article
• Language: English
• Subjects: Cast iron; Castings; Computational fluid dynamics; Conservation equations; Continuity equation; Critical components; Downsizing; Finite volume method; Fluid flow; Fluids; Gearboxes; Gray iron; Growth models; Housings; Mathematical models; Molds; Multiphase; Nodular cast iron; Nodular iron; Partial differential equations; Power plants; Quality control; Solid phases; Solidification; Tolerances; Transport equations; Weight reduction; White iron; Wind power
• ISSN: 1757-8981; 1757-899X
• DOI: 10.1088/1757-899X/84/1/012024

The ongoing increase in the size and capacity of state-of-the-art wind power plants is highlighting the need to reduce the weight of critical components, such as hubs, main shaft bearing housings, gear box housings and support bases. These components are manufactured as nodular iron castings (spheroid graphite iron, or SGI). A weight reduction of up to 20% is achievable by optimizing the geometry to minimize volume, thus enabling significant downsizing of wind power plants. One method for enhancing quality control in the production of thick-walled SGI castings, and thus reducing tolerances and, consequently, enabling castings of smaller volume is via a casting simulation of mould filling and solidification based on a combination of microscopic model and VoF-multiphase approach. Coupled fluid flow with heat transport and phase transformation kinetics during solidification is described by partial differential equations and solved using the finite volume method. The flow of multiple phases is described using a volume of fluid approach. Mass conservation equations are solved separately for both liquid and solid phases. At the micro-level, the diffusion-controlled growth model for grey iron eutectic grains by Wetterfall et al. is combined with a growth model for white iron eutectic grains. The micro-solidification model is coupled with macro-transport equations via source terms in the energy and continuity equations. As a first step the methodology was applied to a simple geometry to investigate the impact of mould-filling on the grey-to-white transition prediction in nodular cast iron.