Study and full simulation of ten different gases on sealed Multi-Wire Proportional Counter (MWPC) by using Garfield and Maxwell codes

• Published in: Applied radiation and isotopes 2016-09, Vol.115, p.289-294
• Main Authors: Shohani, M. Ebrahimi, Golgoun, S.M., Aminipour, M., Shabani, A., Mazoochi, A.R., Akbari, R. Maghsoudi, Mohammadzadeh, M., Davarpanah, M.R., Sardari, D., Sadeghi, M., Mofrad, F. Babapour, Jafari, A.
• Format: Article
• Language: English
• Subjects: Multi-wire proportional counter; Multiplication factor; Noble gas; Pulse height; Signal to noise ratio
• ISSN: 0969-8043; 1872-9800
• DOI: 10.1016/j.apradiso.2016.07.005

In this research gas sealed Multi-Wire Proportional Counter (MWPC) including blades between anode wires and beta particles of 90Sr with 196keV mean energy were considered. Ten different gases such as Noble gases mixtures with methane and several other pure gases were studied. In this type of detector, by using Garfield and Maxwell codes and for each of the gases, variation of different parameters such as first Townsend, electron attachment coefficients with variable electric field and their effects on pulse height or collected charge and in turn on Signal to Noise Ratio (SNR) were studied. Also the effect of anode voltage and its diameter and the pressure of gas on the pulse height were studied. Results show that Garfield and Maxwell codes can be used to study and improve the design of other gaseous detectors. •Simulation of different gases that is applicable for various gas detectors.•Two simulation codes were used and analyzed their results for beta particle.•Different detector parameters were studied (SNR, first Townsend, electron attachment coefficients, anode voltage and etc.).•The effect of blade in the detector were assessed.•The codes are useful for design and improvement of detector.