Fit of lithium disilicate crowns fabricated from conventional and digital impressions assessed with micro-CT

• Published in: The Journal of prosthetic dentistry 2016-10, Vol.116 (4), p.551-557
• Main Authors: Kim, Jae-Hyun, DDS, MSD, Jeong, Ji-Hye, DDS, PhD, Lee, Jin-Han, DDS, PhD, Cho, Hye-Won, DDS, PhD
• Format: Article
• Language: English
• Subjects: Computer-Aided Design; Crowns - standards; Dental Impression Technique; Dental Porcelain - therapeutic use; Dental Prosthesis Design - methods; Dentistry; Humans; In Vitro Techniques; Resins, Synthetic - therapeutic use; X-Ray Microtomography - methods
• ISSN: 0022-3913; 1097-6841
• DOI: 10.1016/j.prosdent.2016.03.028

Abstract Statement of problem Although the number of lithium disilicate crowns fabricated with computer-aided design/computer-aided manufacturing (CAD/CAM) technology has increased, the accuracy of the prostheses produced by using digital pathways remains unknown. Purpose The purpose of this in vitro study was to compare marginal and internal discrepancies of lithium disilicate crowns fabricated from digital and conventional impressions. Material and methods A typodont mandibular first molar was prepared for a lithium disilicate crown, and 20 duplicate dies were fabricated by milling poly(methyl methacrylate) resin blocks from laboratory scans. Four groups of 5 lithium disilicate crowns each were created by using a CS3500 (Carestream Dental) intraoral digital impression; Trios (3shape) intraoral digital impression; Ceramill Map400 (Amann Girrbach) extraoral digital impression; and a heat-press technique as a control group. All of the IPS e.max CAD (Ivoclar Vivadent AG) crowns were produced using a 5-axis milling engine (Ceramill Motion2). The lithium disilicate crowns were cemented with zinc phosphate cement under finger pressure. Marginal and internal discrepancies were measured using micro-computed tomography (SkyScan1172). One-way ANOVAs with the Tukey honest significant differences test were used for statistical analysis of the data (α=.05). Results The mean marginal discrepancies of CS3500 lithium disilicate crowns were 129.6 μm, 200.9 μm for Ceramill Map400, and 207.8 μm 176.1 μm for the heat-press technique; and the internal discrepancy volumes for CS3500 were 25.3 mm3 , 40.7 mm3 for Trios, 29.1 mm3 for Ceramill Map400, and 29.1 and 31.4 mm3 for the heat-press technique. The CS3500 group showed a significantly better marginal discrepancy than the other 3 groups and a smaller internal discrepancy volume than the Trios group ( P