Effect of deposition method on the RCF performance of CrxN thin film ball coatings

CrxN thin films are of interest due to their wear and corrosion-resistant attributes. However, the tribological and functional performance of these coatings greatly depends upon their material properties and deposition processes. In this study, the tribological and functional performance of CrxN coa...

Full description

Saved in:
Bibliographic Details
Published in:Surface & coatings technology 2016-11, Vol.305, p.176-183
Main Authors: Mutyala, Kalyan C., Singh, Harpal, Evans, R.D., Doll, G.L.
Format: Article
Language:English
Subjects:
Bearings
Coatings
CrxN ball coatings
Debris-damaged
Deposition
Fatigue life
IBAD
Magnetron sputtering
Oil-starved
PVD
RCF
Rods
Thin films
Tribology
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:CrxN thin films are of interest due to their wear and corrosion-resistant attributes. However, the tribological and functional performance of these coatings greatly depends upon their material properties and deposition processes. In this study, the tribological and functional performance of CrxN coatings on AISI 52100 spherical rolling elements were evaluated. Two types of deposition processes were used to apply the coatings: a closed-field unbalanced magnetron sputtering system (CFUMS) and an ion beam assisted e-beam deposition (IBAD) system. Whereas the mechanical and compositional properties of the coatings obtained from the two deposition processes were found to be similar, the topographical and microstructural properties of the coatings differed. The tribological performance of the coated specimens was evaluated under boundary layer lubrication in a rolling (three ball-on-rod) contact tribometer, and the functional performance of these coatings on spherical rolling elements was examined in thrust ball bearings. The L50 fatigue life of M50 rods paired with IBAD-coated balls was four times greater than that obtained with the 52100 balls. Significantly, the L50 fatigue life of the M50 rods paired with the IBAD-coated balls was comparable to the fatigue life of M50 rods when paired with high-quality ceramic (Si3N4) balls. Finally, bearings with IBAD-coated balls were observed to operate with lower torque than those with CFUMS-coated balls. •Deposited CrxN coating onto spherical rolling elements in two different PVD systems.•Evaluated the influence of the CrxN coated balls on the M50 rods in a RCF tribometer under boundary lubricated conditions.•Performance of thrust bearings under normal, oil-starved and debris-damaged conditions was evaluated using CrxN coated balls.•IBAD CrxN coated balls significantly improved the fatigue life (L50) of the M50 rods and is comparable with the Si3N4 balls.•IBAD CrxN coated balls appears to be a potential alternative to ceramic or carbide coated balls for bearing applications.
ISSN:0257-8972
1879-3347
DOI:10.1016/j.surfcoat.2016.08.038