Wastewater sludge dewaterability enhancement using hydroxyl aluminum conditioning: Role of aluminum speciation

• Published in: Water research (Oxford) 2016-11, Vol.105, p.615-624
• Main Authors: Cao, Bingdi, Zhang, Weijun, Wang, Qiandi, Huang, Yangrui, Meng, Chenrui, Wang, Dongsheng
• Format: Article
• Language: English
• Subjects: Aluminum; Aluminum salt coagulants; Aluminum speciation; Coagulants; Conditioning; EPS; Extracellular polymeric substances; Filtration; Floc properties; Flocculation; Hydroxy aluminum speciation; Sewage - chemistry; Sludge; Sludge conditioning; Speciation; Strength; Waste Water
• ISSN: 0043-1354; 1879-2448
• DOI: 10.1016/j.watres.2016.09.016

Chemical conditioning is one of the most important processes for improve the performance of sludge dewatering device. Aluminum salt coagulant has been widely used in wastewater and sludge treatment. It is generally accepted that pre-formed speciation of aluminum salt coagulants (ASC) has an important influence on coagulation/flocculation performance. In this study, the interaction mechanisms between sludge particles and aluminum salt coagulants with different speciation of hydroxy aluminum were investigated by characterizing the changes in morphological and EPS properties. It was found that middle polymer state aluminum (Alb) and high polymer state aluminum (Alc) performed better than monomer aluminum and oligomeric state aluminum (Ala) in reduction of specific resistance to filtration (SRF) and compressibility of wastewater sludge due to their higher charge neutralization and formed more compact flocs. Sludge was significantly acidified after addition Ala, while pH was much more stable under Alb and Alc conditioning due to their hydrolysis stability. The size of sludge flocs conditioned with Alb and Alc was small but flocs structure was denser and more compact, and floc strength is higher, while that formed from Ala is relatively large, but floc structure was loose, floc strength is relatively lower. Scanning environmental microscope analysis revealed that sludge flocs conditioned by Alb and Alc (especially PAC2.5 and Al13) exhibited obvious botryoidal structure, this is because sludge flocs formed by Alb and Alc were more compact and floc strength is high, it was easy generated plentiful tiny channels for water release. In addition, polymeric aluminum salt coagulant (Alb, Alc) had better performance in compressing extracellular polymeric substances (EPS) structure and removing sticky protein-like substances from soluble EPS fraction, contributing to improvement of sludge filtration performance. Therefore, this study provides a novel solution for improving sludge dewatering property by controlling aluminum speciation. [Display omitted] •Hydroxy aluminum speciation had important effects on sludge conditioning efficiency.•Polymeric aluminums performed better than mono-Al in improving sludge dewaterability.•Flocs formed by polymeric aluminums conditioning were smaller but more compact than that conditioned by mono-Al.•Polymeric aluminums were more effective in compressing sludge EPS structure than mono-Al.