Development of procedure for measurement of Pb isotope ratios in seawater by application of seaFAST sample pre-treatment system and Sector Field Inductively Coupled Plasma Mass Spectrometry

• Published in: Spectrochimica acta. Part B: Atomic spectroscopy 2016-12, Vol.126, p.93-100
• Main Authors: Vassileva, Emilia, Wysocka, Irena
• Format: Article
• Language: English
• Subjects: Isotope ratios; Marine; Mathematical analysis; Oceans; Pb isotope ratio; Pretreatment; Sea water; SeaFAST system; Seawater; Separation; SF ICP-MS; Uncertainty
• ISSN: 0584-8547; 1873-3565
• DOI: 10.1016/j.sab.2016.10.021

Anthropogenic Pb in the oceans, derived from high-temperature industrial processes, fuel combustion and incineration can have an isotopic signature distinct from naturally occurring Pb, supplied by rock weathering. To identify the different pollution sources accurately and to quantify their relative contributions, Pb isotope ratios are widely used. Due to the high salt content (approximately 3.5% of total dissolved solids) and very low levels of Pb (typically from 1 to 100ngL−1) in seawater the determination of Pb isotope ratios requires preliminary matrix separation and analyte preconcentration. An analytical protocol for the measurements of Pb isotope ratios in seawater combining seaFAST sample pre-treatment system and Sector Field Inductively Coupled Plasma Mass Spectrometry (SF ICP-MS) was developed. The application of seaFAST system was advantageous, because of its completely closed working cycle and small volumes of chemicals introduced in pre-treatment step, resulting in very low detection limits and procedural blanks. The preconcentration/matrix separation step was also of crucial importance for minimizing the isobaric and matrix interferences, coming from the seawater. In order to differentiate between anthropogenic and natural Pb sources, particular attention was paid to the determination of 204Pb isotope because of its implication in some geological interpretations. The validation of the analytical procedure was effectuated according to the recommendations of the ISO/IEC 17025 standard. The method was validated by processing the common Pb isotope reference material NIST SRM 981. All major sources of uncertainty were identified and propagated together following the ISO/GUM guidelines. The estimation of the total uncertainty associated to each measurement result was fundamental tool for sorting the main sources of possible biases. The developed analytical procedure was applied to the coastal and open seawater samples, collected in different regions of the world and revealed that the procedure is applicable for the measurement of Pb isotope ratios in seawater with combined uncertainty adequate to discuss the origin of Pb pollution in the ocean. [Display omitted] •Pb isotope ratios in seawater were determined with SeaFast system and SF ICP-MS.•Validation of the method was performed according to the ISO/IEC 17025 standard.•The uncertainty budget was used for evaluation of main uncertainty contributors.•The expanded uncertainties for the 204Pb-based i