Formation and Occurrence of N‑Chloro-2,2-dichloroacetamide, a Previously Overlooked Nitrogenous Disinfection Byproduct in Chlorinated Drinking Waters

• Published in: Environmental science & technology 2017-02, Vol.51 (3), p.1488-1497
• Main Authors: Yu, Yun, Reckhow, David A
• Format: Article
• Language: English
• Subjects: By products; Chlorine; Disinfection; Disinfection & disinfectants; Drinking water; Drinking Water - chemistry; Halogenation; Kinetics; Nitrogen; Toxicology; Water Pollutants, Chemical; Water Purification; Water quality
• ISSN: 0013-936X; 1520-5851
• DOI: 10.1021/acs.est.6b04218

Haloacetamides (HAMs) are a class of newly identified nitrogenous disinfection byproducts (N-DBPs) whose occurrence in drinking waters has recently been reported in several DBP surveys. As the most prominent HAM species, it is commonly acknowledged that 2,2-dichloroacetamide (DCAM) is mainly generated from dichloroacetonitrile (DCAN) hydrolysis because the concentrations of these two compounds are often well correlated. Instead of DCAM, a previously unreported N-DBP, N-chloro-2,2-dichloroacetamide (N-Cl-DCAM), was confirmed in this study as the actual DCAN degradation product in chlorinated drinking waters. It is suspected that N-Cl-DCAM has been erroneously identified as DCAM, because its nitrogen-bound chlorine is readily reduced by most commonly used quenching agents. This hypothesis is supported by kinetic studies that indicate almost instantaneous N-chlorination of DCAM even at low chlorine residuals. Therefore, it is unlikely that DCAM can persist as a long-lived DCAN decomposition product in systems using free chlorine as a residual disinfectant. Instead, chlorination of DCAM will lead to the formation of an equal amount of N-Cl-DCAM by forming a hydrogen bond between hypochlorite oxygen and amino hydrogen. Alternatively, N-Cl-DCAM can be produced directly from DCAN chlorination via nucleophilic addition of hypochlorite on the nitrile carbon. Due to its relatively low pK a value, N-Cl-DCAM tends to deprotonate under typical drinking water pH conditions, and the anionic form of N-Cl-DCAM was found to be very stable in the absence of chlorine. N-Cl-DCAM can, however, undergo acid-catalyzed decomposition to form the corresponding dichloroacetic acid (DCAA) when chlorine is present, although those acidic conditions that favor N-Cl-DCAM degradation are generally atypical for finished drinking waters. For these reasons, N-Cl-DCAM is predicted to have very long half-lives in most distribution systems that use free chlorine. Furthermore, an analytical method using ultra performance liquid chromatography (UPLC)/negative electrospray ionization (ESI–)/quadrupole time-of-flight mass spectrometry (qTOF) was developed for the detection of a family of seven N-chloro-haloacetamides (N-Cl-HAMs). Combined with solid phase extraction (SPE), the occurrence of N-Cl-DCAM and its two brominated analogues (i.e., N-chloro-2,2-bromochloroacetamide and N-chloro-2,2-dibromoacetamide) was quantitatively determined for the first time in 11 real tap water samples. The discovery