Structure and properties of cast and splat-quenched high-entropy Al–Cu–Fe–Ni–Si alloys

• Published in: Physics of metals and metallography 2017, Vol.118 (1), p.39-47
• Main Authors: Bashev, V. F., Kushnerov, O. I.
• Format: Article
• Language: English
• Subjects: Alloys; Analysis; Atomic structure; Body centered cubic lattice; Chemistry and Materials Science; Cooling rate; COPPER ALUMINUM ALLOYS; Diffusion; ENTROPY; HARDNESS; Hardness (Materials); Ionizing radiation; Materials Science; Metallic Materials; Metals (Materials); Microhardness; MOLECULAR STRUCTURE; Nuclear energy; Phase composition; Phase Transformations; Quenching; QUENCHING MECHANISMS; SOLID SOLUTIONS; Specialty metals industry; Structure; X ray diffraction
• ISSN: 0031-918X; 1555-6190
• DOI: 10.1134/S0031918X16100033

The effect of the composition and cooling rate of the melt on the microhardness, phase composition, and fine-structure parameters of as-cast and splat-quenched (SQ) high-entropy (HE) Al–Cu–Fe–Ni–Si alloys was studied. The quenching was performed by conventional splat-cooling technique. The cooling rate was estimated to be ~10 6 K/s. Components of the studied HE alloys were selected taking into account both criteria for designing and estimating their phase composition, which are available in the literature and based on the calculations of the entropy and enthalpy of mixing, and the difference between atomic radii of components as well. According to X-ray diffraction data, the majority of studied Al–Cu–Fe–Ni–Si compositions are two-phase HE alloys, the structure of which consists of disordered solid solutions with bcc and fcc structures. At the same time, the Al 0.5 CuFeNi alloy is single-phase in terms of X-ray diffraction and has an fcc structure. The studied alloys in the as-cast state have a dendritic structure, whereas, after splat quenching, the uniform small-grained structure is formed. It was found that, as the volume fraction of bcc solid solution in the studied HE alloys increases, the microhardness increases; the as-cast HE Al–Cu–Fe–Ni–Si alloys are characterized by higher microhardness compared to that of splat-quenched alloys. This is likely due to the more equilibrium multiphase state of as-cast alloys.