Instrumental Setup for Simultaneous Total and Speciation Analysis of Volatile Arsenic Compounds in Gas and Liquefied Gas Samples

• Published in: Analytical chemistry (Washington) 2017-06, Vol.89 (11), p.5719-5724
• Main Authors: Freije-Carrelo, Laura, Moldovan, Mariella, García Alonso, J. Ignacio, Thanh VO, Thuy Diep, Encinar, Jorge Ruiz
• Format: Article
• Language: English
• Subjects: Analytical chemistry; Arsenic; Arsenic compounds; Arsine; Butane; Calibration; Chemical industry; Chemistry; Detection limits; Gas sampling; Linearity; Liquefied gases; Liquid phases; Metalloids; Metals; Nitrogen; Optimization; Propylene; Speciation
• ISSN: 0003-2700; 1520-6882
• DOI: 10.1021/acs.analchem.7b01082

Although analysis of metals and metalloids, such as arsenic, is widely spread in many different fields, their analysis in gas and liquefied gas samples is still a challenge. A new GC-ICP-MS set up has been developed for their simultaneous total and speciation analysis in gas and liquefied gas samples without the need of a preconcentration step. An arsine in nitrogen standard was used for optimization and evaluation of the system. Good linearity and detection limits in the very low ppt level for both total and speciation analyses were found. Liquefied butane pressurized under nitrogen and doped with arsine and a propylene real sample from a cracker plant were analyzed using both external calibration and standard additions methods. The good match between both quantifying approaches demonstrated almost negligible matrix effects, even for the total analysis. Application of the approach to check repartition of volatile elements or species between gas and liquid phases was performed in the real propylene sample. Finally, its potential applicability for the simultaneous total and speciation analysis of other elements, such as Hg, was also proved.