Wear resistance of poly(2-methacryloyloxyethyl phosphorylcholine)-grafted carbon fiber reinforced poly(ether ether ketone) liners against metal and ceramic femoral heads

• Published in: Journal of biomedical materials research. Part B, Applied biomaterials Applied biomaterials, 2018-04, Vol.106 (3), p.1028-1037
• Main Authors: Yamane, Shihori, Kyomoto, Masayuki, Moro, Toru, Hashimoto, Masami, Takatori, Yoshio, Tanaka, Sakae, Ishihara, Kazuhiko
• Format: Article
• Language: English
• Subjects: Aluminum oxide; Bearing materials; Biomedical materials; Carbon fibers; Ceramic fibers; Chromium; Cobalt; Cobalt base alloys; Femur; Fiber reinforced materials; Grafting; Hip; Hip joint; Joint surgery; Ketones; Linings; Materials research; Materials science; Mechanical properties; Methacryloyloxyethyl phosphorylcholine; Molybdenum; Motion stability; Particulate matter; Phosphorylcholine; Plastics; Polyether ether ketones; Surgical implants; Total hip arthroplasty; Wear particles; Wear resistance; Wettability; Zirconia; Zirconia toughened alumina; Zirconium dioxide
• ISSN: 1552-4973; 1552-4981
• DOI: 10.1002/jbm.b.33918

Younger, active patients who undergo total hip arthroplasty (THA) have increasing needs for wider range of motion and improved stability of the joint. Therefore, bearing materials having not only higher wear resistance but also mechanical strength are required. Carbon fiber-reinforced poly(ether ether ketone) (CFR-PEEK) is known as a super engineering plastic that has great mechanical strength. In this study, we focused on poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)-grafted CFR-PEEK and investigated the effects of PMPC grafting and the femoral heads materials on the wear properties of CFR-PEEK liners. Compared with untreated CFR-PEEK, the PMPC-grafted CFR-PEEK surface revealed higher wettability and lower friction properties under aqueous circumstances. In the hip simulator wear test, wear particles generated from the PMPC-grafted CFR-PEEK liners were fewer than those of the untreated CFR-PEEK liners. There were no significant differences in the size and the morphology of the wear particles between the differences of PMPC-grafting and the counter femoral heads. Zirconia-toughened alumina (ZTA) femoral heads had significantly smoother surfaces compared to cobalt-chromium-molybdenum alloy femoral heads after the hip simulator test. Thus, we conclude that the bearing combination of the PMPC-grafted CFR-PEEK liner and ZTA head is expected to be a lifelong bearing interface in THA. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1028-1037, 2018.