Performance of biomorphic Silicon Carbide as particulate filter in diesel boilers

• Published in: Journal of environmental management 2017-12, Vol.203 (Pt 3), p.907-919
• Main Authors: Orihuela, M. Pilar, Gómez-Martín, Aurora, Becerra, José A., Chacartegui, Ricardo, Ramírez-Rico, Joaquín
• Format: Article
• Language: English
• Subjects: Bioceramic material; Biomorphic Silicon Carbide; Carbon Compounds, Inorganic; Ceramics - chemistry; Diesel boiler; Domestic boiler; Filtration; Particulate filter; Particulate matter; Porosity; Silicon Compounds; Vehicle Emissions - analysis
• ISSN: 0301-4797; 1095-8630
• DOI: 10.1016/j.jenvman.2017.05.003

Biomorphic Silicon Carbide (bioSiC) is a novel porous ceramic material with excellent mechanical and thermal properties. Previous studies have demonstrated that it may be a good candidate for its use as particle filter media of exhaust gases at medium or high temperature. In order to determine the filtration efficiency of biomorphic Silicon Carbide, and its adequacy as substrate for diesel particulate filters, different bioSiC-samples have been tested in the flue gases of a diesel boiler. For this purpose, an experimental facility to extract a fraction of the boiler exhaust flow and filter it under controlled conditions has been designed and built. Several filter samples with different microstructures, obtained from different precursors, have been tested in this bench. The experimental campaign was focused on the measurement of the number and size of particles before and after placing the samples. Results show that the initial efficiency of filters made from natural precursors is severely determined by the cutting direction and associated microstructure. In biomorphic Silicon Carbide derived from radially cut wood, the initial efficiency of the filter is higher than 95%. Nevertheless, when the cut of the wood is axial, the efficiency depends on the pore size and the permeability, reaching in some cases values in the range 70–90%. In this case, the presence of macropores in some of the samples reduces their efficiency as particle traps. In continuous operation, the accumulation of particles within the porous media leads to the formation of a soot cake, which improves the efficiency except in the case when extra-large pores exist. For all the samples, after a few operation cycles, capture efficiency was higher than 95%. These experimental results show the potential for developing filters for diesel boilers based on biomorphic Silicon Carbide. •Biomorphic Silicon Carbide filters may reduce particulate emissions from boilers.•The filtration performance depends on the precursor and on the cutting direction.•The wide variety of plant species allows to almost tailor the porous morphology.•Some samples showed high initial filtration efficiency with high permeability.•A correlation between filtration efficiency and permeability is proposed.