SPINS-IND: Pellet injector for fuelling of magnetically confined fusion systems

• Published in: Review of scientific instruments 2017-06, Vol.88 (6), p.063503-063503
• Main Authors: Gangradey, R., Mishra, J., Mukherjee, S., Panchal, P., Nayak, P., Agarwal, J., Saxena, Y. C.
• Format: Article
• Language: English
• Subjects: Control systems; Diagnostic systems; Ejection; Helium; Injectors; Neutral gases; Programmable logic controllers; Refrigeration; Remote control; Scaling laws; Scientific apparatus & instruments; Shielding; Trigger circuits
• ISSN: 0034-6748; 1089-7623
• DOI: 10.1063/1.4985639

Using a Gifford-McMahon cycle cryocooler based refrigeration system, a single barrel hydrogen pellet injection (SPINS-IND) system is indigenously developed at Institute for Plasma Research, India. The injector is based on a pipe gun concept, where a pellet formed in situ in the gun barrel is accelerated to high speed using high pressure light propellant gas. The pellet size is decided by considering the Greenwald density limit and its speed is decided by considering a neutral gas shielding model based scaling law. The pellet shape is cylindrical of dimension (1.6 mm ℓ × 1.8 mm φ). For pellet ejection and acceleration, a fast opening valve of short opening duration is installed at the breech of the barrel. A three-stage differential pumping system is used to restrict the flow of the propellant gas into the plasma vacuum vessel. Diagnostic systems such as light gate and fast imaging camera (240 000 frames/s) are employed to measure the pellet speed and size, respectively. A trigger circuit and a programmable logic controller based integrated control system developed on LabVIEW enables to control the pellet injector remotely. Using helium as a propellant gas, the pellet speed is varied in the range 650 m/s–800 m/s. The reliability of pellet formation and ejection is found to be more than 95%. This paper describes the details of SPINS-IND and its test results.