Investigation of basic properties of fly ash from urban waste incinerators in China

• Published in: Journal of environmental sciences (China) 2007, Vol.19 (4), p.458-463
• Main Authors: JIANG, Jian-guo, XU, Xin, WANG, Jun, YANG, Shi-jian, ZHANG, Yan
• Format: Article
• Language: English
• Subjects: Carbon - analysis; China; Coal Ash; fly ash; heavy metals; Incineration; incinerator; leaching toxicity; Metals, Heavy - analysis; Oxides - analysis; Particulate Matter - analysis; urban waste; 城市废物焚化炉; 基本性质; 重金属
• ISSN: 1001-0742; 1878-7320
• DOI: 10.1016/S1001-0742(07)60076-X

Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence （XRF）, scanning electron microscopy （SEM）, X-ray diffraction （XRD）. The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements （〉10000 mg/kg, listed in decreasing order of abundance） in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements （1000 to 10000 mg/kg） include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L （Pb） and from 0.049 to 164.90 mg/L （Zn）, mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.