Digital power factor control and reactive power regulation for grid-connected photovoltaic inverter

• Published in: Renewable energy 2009, Vol.34 (1), p.315-321
• Main Authors: Hassaine, L., Olias, E., Quintero, J., Haddadi, M.
• Format: Article
• Language: English
• Subjects: Applied sciences; Digital control; Direct energy conversion and energy accumulation; Electrical engineering. Electrical power engineering; Electrical machines; Electrical power engineering; Exact sciences and technology; FPGA; Grid-connected PV system; Miscellaneous; Photoelectric conversion; Power electronics, power supplies; Power factor control; Power networks and lines; Regulation and control; Single-phase inverter
• ISSN: 0960-1481; 1879-0682
• DOI: 10.1016/j.renene.2008.03.016

The overall efficiency of photovoltaic (PV) systems connected to the grid depends on the efficiency of direct current (DC) of the solar modules to alternate current (AC) inverter conversion. The requirements for inverter connection include: maximum power point, high efficiency, control power injected into the grid, high power factor and low total harmonic distortion of the currents injected into the grid. An approach to power factor control and reactive power regulation for PV systems connected to the grid using field programmable gate array (FPGA) is proposed. According to the grid demands; both the injected active and reactive powers are controlled. In this paper, a new digital control strategy for a single-phase inverter is carried out. This control strategy is based on the phase shift between the inverter output voltage and the grid voltage, and the digital sinusoidal pulse width modulation (DSPWM) patterns, in order to control the power factor for a wide range of the inverter output current and consequently the control and the regulation of the reactive power will be achieved. The advantage of the proposed control strategy is its implementation around simple digital circuits. In this work, a simulation study of this strategy has been realized using Matlab/Simulink and PSIM. In order to validate its performance, this control has been implemented in a FPGA. Experimental tests have been carried out demonstrating the viability of this control in order to control the power factor and the injected power into the grid.