Pilot-scale Studies of Different Covers on Unoxidised Sulphide-rich Tailings in Northern Sweden: the Geochemistry of Leachate Waters

• Published in: Mine water and the environment 2006-09, Vol.25 (3), p.171-183
• Main Authors: Alakangas, L, Oehlander, B
• Format: Article
• Language: English
• ISSN: 1025-9112; 1616-1068
• DOI: 10.1007/s10230006-0129-z

Leachate water quality from covered and uncovered unoxidised sulphide-rich tailings in six pilot-scale (5x5x3 m super(3)) test cells was monitored during 2004 and 2005. The covers consisted of a layer of clayey till, sewage sludge, apatite or Trisoplast (a commercial mixture of tailings, bentonite, and a polymer). All layers were protected by an unspecified till except in one reference cell, where the tailings were left open. All leachate waters showed near-neutral pH as a result of neutralization by calcite in the tailings and by Ca(OH) sub(2) added prior to deposition. Average dissolved sulphur concentrations in the leachates were approximately 600 mg L super(-1), except in the cell with sewage sludge (300 mg L super(-1)). The source of sulphur was mainly pyrite oxidation, but residual sulphur probably remained from the enrichment process. The near-neutral phi favoured precipitation of metal-(oxy)hydroxides with subsequent removal of trace elements such as Cd, Cu and Pb (< 15 mu g L super(-1)) from the solutions. High concentrations of Co, Mn, Ni, and Zn were found in leachates from the apatite, Trisoplast, and uncovered tailings cells. High As concentrations were found in the leachates in the sewage sludge and clayey till cells. The lowest metal concentrations, redox potential, and highest pH were found in the sewage sludge cell. Decreased elemental metal concentrations during 2004 suggest improved performance over time.