Ion-Selective Polyamide Acid Nanofiber Separators for High-Rate and Stable Lithium–Sulfur Batteries

• Published in: ACS applied materials & interfaces 2018-12, Vol.10 (49), p.42198-42206
• Main Authors: Luo, Xiang, Lu, Xianbo, Zhou, Gangyong, Zhao, Xingyu, Ouyang, Yue, Zhu, Xiaobo, Miao, Yue-E, Liu, Tianxi
• Format: Article
• Language: English
• ISSN: 1944-8244; 1944-8252
• DOI: 10.1021/acsami.8b10795

Lithium–sulfur (Li–S) batteries have attracted great attention because of their high energy density and high theoretical capacity. However, the “shuttle effect” caused by the dissolution of polysulfides in liquid electrolytes severely hinders their practical applications. Herein, we originally propose a carboxyl functional polyamide acid (PAA) nanofiber separator with dual functions for inhibiting polysulfide transfer and promoting Li+ migration via a one-step electrospinning synthesis method. Especially, the functional groups of −COOH in PAA separators provide an electronegative environment, which promotes the transport of Li+ but suppresses the migration of negative polysulfide anions. Therefore, the PAA nanofiber separator can act as an efficient electrostatic shield to restrict the polysulfide on the cathode side, while efficiently promoting Li+ transfer across the separator. As a result, an ultralow decay rate of only 0.12% per cycle is achieved for the PAA nanofiber separator after 200 cycles at 0.2 C, which is less than half that (0.26% per cycle) of the commercial Celgard separator.